Owner`s manual

HDD Installation

This is a guide for installation of HDD into the rack. No screw needed

Before install the HDD into the rack, please check the

four bumps on the rack. There are two A bumps on the

side, and two B bumps on the bottom.

Find out the side holes of HDD, and assembly them with

two A bumps. Insert the HDD first on the side. Then

assembly the bottom holes of HDD with two B

bumps.

Insert the rack smoothly into the main unit. Please make

sure that handle of rack is open status, before insertion.

Push the rack until it reaches internal end of the unit.

Close the handle of the rack after insertion.