User Manual

13
BEFORE USE
IGNITION BATTERY
1. Install one AA battery for the electronic ignition located inside of the unit (AA battery included). Unscrew igniter cap
counterclockwise, insert battery with positive side facing out, then tighten igniter cap back on (make sure the battery is
installed the proper direction). [Figure 1]
CHARGING THE AUDIO BATTERY
1. Before using your Ukiah Co. audio system, fully charge the lithium-ion battery by plugging the charging cable
provided into the charging port on the unit. [Figure 2]
• The LED INDICATOR on the charger will turn RED when the battery is charging.
• The LED INDICATOR will turn GREEN when the battery is fully charged.
The battery will run for up to 20 hours on a single charge. The unit can be operated while connected to the charger.
The internal battery powers the audio system only and is not needed for “Fire Only” mode.
WARNING — Charge the battery by using only the original charging cable supplied. Using another charging cable
may harm the battery.
LAVA ROCK/GLASS MEDIA
1. Open the bag containing the decorative glass or lava rock and carefully place in the burner tray, making sure not
to cover the screen that protects the ignition system or the holes of the burner. If the burner holes are covered, the
ŴDPHVZLOOQRWUHDFWWRPXVLFDQGVRXQGDVLQWHQGHG5HSODFHPDJQHWLFOLGLIDSSOLFDEOHWRNHHSPHGLDFRQWDLQHGIRU
transportation.
[Figure 1] - Install one AA battery. [Figure 2] - Lithium-ion Battery charger input.