User Manual

Finally, the optional DO-4 digital output card may be fitted which provides high
quality A-D conversion of each channel output. The digital output is 24 bit
SPDIF format (via two RCA phono connectors), with switchable sample rate
between 44.1 & 48kHz. An external BNC wordclock input is also provided.
Please read this manual fully before installing or operating the 5001.
2. PRECAUTIONS
The TL Audio 5001 requires very little installation, but like all electrical
equipment, care must be taken to ensure reliable, safe operation. The
following points should always be observed:
- All mains wiring should be installed and checked by a qualified
electrician,
- Ensure the correct operating voltage is selected on the rear panel
before connecting to the mains supply,
- Never operate the unit with any cover removed,
- Do not expose to rain or moisture, as this may present an electric
shock hazard,
- Replace the fuse with the correct type and rating only.
Warning: This equipment must be earthed.