User guide

22
automation systems Status acts as a momentary switch intended to
identify the presence of a signal path to the automation system computer
- in effect, a ‘local status’ switch. If no automation is fitted then the
Status switch has no effect on the audio signal.
AUTO (25)
If automation is fitted, the Auto button allows a channel’s automation
stage to be bypassed if required, thus removing any unwanted VCA
stages from the signal path. Depressing the ‘Auto’ switch engages the
VCA.
Internal links are fitted such that this switch has no effect on a non-
automated console. If automation is fitted then the links should be
removed (see technical section, part 3.8).
MIX B FADER (26)
This high quality 60mm Alps fader has +10dB of gain at maximum and
controls the level of the monitor channel signal.
3.7 Main Channel Output
PAN (27)
PAN MIX
B
MUTE
PK
SIG
AUX
1 On
2 On
3 On
4 On
5+6
AUX
3+4 PRE
H - MID
+/-
Hz
Q
+48V
LINE
PHASE
GAIN
FLIP
MON
TRIM
HF
L - MID
+/-
Hz
Q
EQ ON
SOLO
+10
+5 STAT
0
AUTO
-5
-10 SRCE-CH
-20
-30 HF/LF
EQ
-40
-50
-60 LM/HM
-70 EQ
-80
PAN
L R
MUTE
PK
SIG
SOLO
+10
STAT
+5
AUTO
0
BUSS
-5
1+2
-10
3+4
-20
5+6
-30
-40 7+8
-50
-60
-70 L+R
-80
2
1
3
5
7
8
11
14
18
19
20
24
25
21
22
23
29
30
31
32
33
34
40
4
6
9
10
12
13
15
16
17
26
27
28
35
STEREO AUX
PAN 7/8
LEVEL
On
PRE
MIX B