User's Manual

3
4. Phone Operations
A compatible phone with App installed can be used as Admin of Locks. Management tasks
can be performed by Admin in the App. An Admin can manage multiple Locks, but one Lock
can only have one Admin at a time. Other phones can be Clients of the Lock.
Pairing to Become the Admin
1. In K3 Connect, press the “+” on the top-right corner of the Locks page
2. Fill-in the DIN (A1) and your selected Lock name, then confirm and put the phone
close to the Lock (within 1 meter)
3. Push the SETUP button inside the back cover.
4. After Pairing, the phone is the Admin of the Lock. Original Admin will be denounced
and no longer able to unlock/manage the Lock
Unlocking
Both Admin and Client can do Unlocking. In K3 Connect, in the Locks page, click on the
tab of your Lock name to trigger it
Management
The Admin can do the following management in the App:
(suggest only put minimum App UI in this manual; App is constantly improved and more
features or better UI will be designed in the future)
 Set Names of Locks
 Lock parameters setting:
- Passage mode
- Lockout mode
- Relock Delay
- Tamper Attempt Limit
- Tamper Alarm Duration
- Wrong Entry Attempt Limit
- Wrong Entry Suspend Duration
- Buzzer Volume
 Manage Clients (including other phones, cards):
- Add
- Delete
- Suspend