User's Manual

Features
Programming a Feature on a
Button
Your console may already have features programmed. You
can program unlabeled buttons with additional features.
1. Label the button you want to program.
2. Slide the
T/P switch to the P position.
You hear a tone every 20 seconds to remind you that you are in
programming mode.
3. Press the button you labeled.
4. Dial the programming code (See Appendix B for list of
programming codes).
Some features require additional entries. For example,
you must dial an extension for inside Auto Dial.
5. Slide the
T/P switch to the center position.
Using a Feature Code
There are two ways to access a feature:
■ Press a button programmed with a specific feature.
You can program some features on line buttons for
one-touch use or to toggle the feature on and off. Your
console may already have features programmed. You
can program any unused line buttons with additional
features.
Programming a Feature on a Button 4-5