OPERATING INSTRUCTIONS REMOTE CONTROLLER C-RM1000 CU Thank you for purchasing TOA's Remote Controller. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS .................................................................................. 5 GENERAL DESCRIPTION 2. GENERAL DESCRIPTION ............................................................................... 7 3. FUNCTIONS .......................................................................................................... 7 4. HANDLING PRECAUTIONS ............................................................................ 8 5.
9.8. Combination Camera Menu Display ................................................................. 23 9.9. Storing the Preset Positions .............................................................................. 24 9.10. Deleting Preset Position Data (Communication method: Type B only) ........... 24 10. DIGITAL VIDEO RECORDER OPERATION 10.1. Video Recording ................................................................................................ 25 10.1.1. LED indication during recording ...
12.4. Function Settings ............................................................................................... 40 12.4.1. Group settings ....................................................................................... 40 12.4.2. Abbreviation .......................................................................................... 41 12.4.3. Abbreviation (Quick display function) .................................................... 42 12.4.4. Abbreviation (Function programming) ..............
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference.
CAUTION Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. When Installing the Unit • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock.
2. GENERAL DESCRIPTION TOA's C-RM1000 Remote Controller is used to remotely control TOA's 9-channel (C-DR091 series) or 16channel (C-DR161 series) Digital Video Recorders. It can also remotely control operation of Combination cameras connected to the Digital Video Recorder. The C-RM1000 is equipped with a 3-axis joystick that permits main operation to be performed with one hand. 3.
4. HANDLING PRECAUTIONS • Do not connect the AC adapter when using the supplied modular cable since the power is supplied from the Digital Video Recorder. • Do not connect the DVR Control Output Terminal A (RJ-11) to the telephone line. • Do not lift the Remote Controller by joystick or subject the Controller to strong shocks. Damage may be caused to the Controller. • To clean the front panel, wipe with a soft cloth. Do not use thinner or alcohol.
Definition Digital Video Recorder number (DVR): Refers to the DVR-ID number when the Digital Video Recorders are cascadeconnected. Monitor number (MON): Refers to the Digital Video Recorder's monitor output number. There are two monitor outputs: Monitor outputs 1 and 2. Camera number (CAM): Refers to the camera video input terminal number connected to the Digital Video Recorder. Position number (POS): The Combination Camera's orientation can be programmed into a number (1 – 255).
6.
(8) Joystick In live mode Performs pan, tilt, and zoom operation of connected Combination Cameras. In playback mode Performs playback, reverse playback, fast forward playback, and pause operation. In menu display mode Moves the cursor (lever position: up, down, left, or right) and confirms (clockwise lever rotation) or cancels (counterclockwise lever rotation) the setting.
[ Rear Panel ] 23 24 25 [ Bottom Surface Indications ] GND SER. DVR CONTROL OUTPUT-B DVR CONTROL OUTPUT-A DC IN Do not connect this jack to telephone line. REMOTE CONTROLLER model C-RM1000 CU 12/13.8V 250mA TOA Corporation MADE IN JAPAN (23) DVR Control Output Terminal B (screwless type) Use this terminal when the supplied modular cable cannot be used or when connecting the Remote Controller to the interface unit. The supplied AC adapter is required when using this terminal.
7. EQUIPMENT SELECTION 7.1. Digital Video Recorder Selection 1. Press the desired Digital Video Recorder number using a ten-key numerical pad. [Example] 7 2. Press the DVR key. The selected Digital Video Recorder number is displayed on the LCD screen. (The key cannot be used if the Digital Video Recorder is not connected.) For monitors and cameras, Monitor 1 and Camera 1 are automatically selected. LCD screen DVR 7 1 1 MON CAM DVR MENU DVR POS 7.1.1.
7.3. Camera Selection Select the camera to be displayed or operated. 1. Press the camera number to be selected using the ten-key numerical pad. 2. Press the CAM key. The selected camera number is displayed on the LCD screen (CAM section). [Example] 1 5 LCD screen CAM 7 CAM MENU DVR 1 15 MON CAM POS Camera No. displayed on the full screen 7.3.1. Quick group camera selection (available only when cascade-connected) Specified cameras within the group can be selected using straight number entry.
8. MONITOR DISPLAY Functions that can be displayed differ between Monitor outputs 1 and 2. Playback mode Live mode Function Full 4 Seg 9 Seg Full 16 Seg* Sequence 4 Seg 9 Seg Electronic Zoom 16 Seg* Cascade output Monitor output 1 Monitor output 2 Function Digital Recorder menu Search menu Display position setting screen Triplex setting screen Archive menu Combination Camera menu Monitor output 1 Monitor output 2 * Only the C-DR161 Series (16-channel versions) can display.
8.2. Multi-Screen Display The screen switches as follows each time the MULTI key is pressed while in live or playback mode. 9-channel recorder 4 Seg A 4 Seg B 9 Seg 4 Seg C 16-channel recorder 4 Seg A 4 Seg B 16 Seg 4 Seg C 9 Seg B 4 Seg D 9 Seg A Note: Monitor output 2 can display only live images in full-screen and 4-segment split-screen displays. 1. Press the MULTI key after selecting the Digital Video Recorder. The MULTI key lights and camera Nos.
8.4. 9-Segment Split Screen Display 1. MENU Press the SHIFT key. The SHIFT key lights. LCD screen 7 SHIFT 2. Press the MULTI (9-Split-Screen) key. The MULTI key lights and Camera Nos. 1-9 (9-segment split screen A) are displayed on the monitor. 9 - S E GME N T 1 15 Monitor screen (9-segment split screen A) MULTI MULTI 1 2 3 4 5 6 7 8 9 Lights Camera No. 2-1. When the 16-channel recorder is used Repeat Steps 1 and 2 to display the camera numbers to be monitored.
8.6. Changing the Multi-Screen Display Position Live and recorded images can be set to be displayed on user-specified split screen segments, and the display position of the multi-segment split screen can be freely changed. For more information, please read the Digital Video Recorder's instruction manual. 1. With the display mode set to live mode, display the multisegment split screen to be changed. (Refer to p. 16: MultiScreen Display.) L 1 L 2 L 3 L 4 2. Hold down the MULTI key for 2 seconds or more.
8.8. Group Sequential Display Group sequential displays can be performed if "Group" has been selected in the Cascade Connection setting. The Monitor 1 sequential display setting is used for the group sequence function. Notes • Sequential display settings must be performed in advance for the Digital Video Recorder. For the sequence setting method, please refer to the instruction manual enclosed with the Digital Video Recorder.
8.9. Zoom Display (Electronic zoom) Live or recorded full-screen images can be viewed in 2X zoom display. Multiple-segment split-screens cannot be zoomed. Note "Zoom ON" and "Zoom OFF" must be preprogrammed into a function key or abbreviation number. (Refer to p. 43; Abbreviation (Function programming).) 1. Press the "Zoom ON"-preprogrammed function key or abbreviation number. The arrow is displayed in the center of the screen. F1 OR 2.
9. COMBINATION CAMERA OPERATION The following camera operations can be performed when the Digital Video Recorder is in live mode and the Combination camera is selected. 9.1. Camera Rotation and Zoom Operation Using the Joystick Connected Combination cameras can be rotated in the desired direction and their zoom lenses operated using the joystick. After selecting the camera, tilt the joystick in the desired direction of movement. The camera moves in the direction in which the joystick has been tilted.
9.3. Iris Operation (Communication method: Type B only) This iris can be adjusted using the IRIS key when the Combination camera is connected. IRIS After selecting the camera, press the IRIS (+) or (-) key. Iris operation continues as long as the key is pressed. The (+) key opens the iris, and the (-) key closes the iris. 9.4. Auto-Function Operation Auto-functions can be operated using the AUTO key when the Combination camera is connected.
9.6. Focus Speed Settings Camera focus speed can be set. (Refer to p. 48; Focus Speed.) 9.7. Utilization of the Abbreviation Number Function By pressing the SET key after entering the preprogrammed abbreviation number using the ten-key numerical pad, or by simply pressing the function key, the following camera operations can be performed: (Refer to p. 34; Abbreviation (Function programming).) (Refer to p. 41; Abbreviation.) • • • • • • Display of the set camera image (DVR No., Camera No. and Position No.
9.9. Storing the Preset Positions The preset position can be stored on the camera menu, however it can be easily stored by performing the following operation; 1. Select the camera for which the preset position is programmed. (Refer to p. 13; Equipment Selection.) 2. Rotate the Combination camera to set it to the desired angle of view. [Example] 3. Enter a preset position number using the ten-key numerical pad. 4. Press the SHIFT key. The key lights. 5. Hold down the POS key for 2 seconds or more.
10. DIGITAL VIDEO RECORDER OPERATION The following Digital Video Recorder operations can be performed using the Remote Controller: 10.1. Video Recording Priority recording and auto-recording (Alarm event recording and Normal recording) modes are made available to the Digital Video Recorder. For details, please refer to the instruction manual enclosed with the Digital Video Recorder. 10.1.1.
10.1.3. Resetting alarm event recording The Alarm reset key flashes and the buzzer tone sounds during Alarm event recording. Alarm event recording cannot be initiated by the Remote Controller. For the method of starting the Alarm event recording, refer to the instruction manual enclosed with the Digital Video Recorder. For the operations of the unit while in alarm mode, refer to p. 34; Alarm Operations. Hold down the Alarm reset key for 2 seconds or more.
10.2.3. Stop operation PLAY / LIVE Press the PLAY/LIVE key while in playback mode. Playback stops, switching to live mode. The PLAY/LIVE key remains unlit while in live mode. Lights Playback mode PLAY / LIVE Extinguishes Live mode PB4 PB5 L4 L5 PB6 PB7 L6 L7 10.2.4. Forward/reverse quick playback Leave the joystick tilted to the left or right during playback. The left-tilt position permits fast reverse playback and the right-tilt position permits fast forward playback.
10.2.7. Frame advance/reverse playback Tilt the joystick to the left or right while playback is temporarily stopped. The left-tilt position permits frame reverse playback, and the right-tilt position permits frame forward playback. Frame reverse Frame advance In pause 10.2.8. Instant event access playback FOCUS Press the FOCUS (+) key while playback is temporarily stopped. Playback temporarily stops at the beginning of the next event. Press the FOCUS (-) key while playback is temporarily stopped.
10.3. Search Operation It is possible to search recorded images by date, time, or event. For details, please refer to the instruction manual enclosed with the Digital Video Recorder. 1. Press the Search key. The search menu is displayed SEARCH SEARCH Operate the Remote Controller as follows while the search menu is being displayed: • To move the cursor, tilt the joystick up, down, left, or right. • To confirm settings, rotate the joystick clockwise or press the SET key.
10.5. Motion Detection Area Settings Motion detection areas can be set on the digital video recorder menu. For more information, please refer to the digital video recorder’s instruction manual. 1. Display the motion detection area setting screen using the digital video recorder menu. Operate the Remote Controller as follows while the menu is being displayed: • To move the cursor, tilt the joystick up, down, left, or right.
10.7. Triplex Settings Live images can be assigned to any segment of the screen while recorded images are played back on the multi-segment split screen. For details, please read the instruction manual enclosed with the Digital Video Recorder. 1 Hold down the MULTI key for 2 seconds or more while recorded images are played back on the multi-segment split screen. The Triplex setting screen is displayed.
10.8. Entering the Digital Video Recorder Password When “Remote access restriction” is set to ON in the Digital Video Recorder’s security settings and a password is valid, only the Digital Video Recorder’s current operation level can be accessed. To change the Digital Video Recorder’s operation level, perform the following procedure. For the Remote Controller’s login and logout method, refer to p.33; Login and Logout.
11. OTHER OPERATIONS 11.1. Log-In and Log-Out If a password has been set, it is possible to log in to or log out of each operation level by following the procedures below. For password settings, please refer to p. 46; Password. For the Digital Video Recorder’s login and logout method, refer to p. 32; Entering the Digital Video Recorder Password. 11.1.1. Log-in 1. Hold down the Menu key for 2 seconds or more. The “PASSWORD” indication is displayed on the LCD screen.
11.2. Abbreviation Number This function permits quick dialing preprogrammed into a number. Camera images (DVR No., monitor No., camera No., and position No.) and the functions of the Combination Camera and Digital Video Recorder can be programmed into a number. (Refer to p. 43; Abbreviation (Function programming).) [Example] 1. Enter the abbreviation number using the tenkey numerical pad. 1 5 LCD screen 15 2. Press the SET key. Operation preprogrammed into the selected number is executed.
11.3.2. To stop a buzzer tone Press the RESET key to stop the buzzer tone. BUZZER STOP RESET 11.3.3. To reset alarm Hold down the RESET key for 2 seconds or more while alarm is being activated. The RESET key extinguishes, canceling the alarm mode. BUZZER STOP RESET BUZZER STOP RESET Note Alarm cannot be reset when “Level” has been selected in the Digital Video Recorder’s alarm settings. The alarm status continues as long as the alarm signal is received. 11.3.4.
12. SETTINGS 12.1. Setting Item Summaries Remote Controller Menu Display (Hold down the Menu key for 2 seconds or more.) Setting Item Group Abbreviation Description 1. Setting Two or more cascade-connected Digital Recorders can be assigned to a group. It is also possible to restrict access to operation of the Remote Controllers in each group. 2. Transfer Transfers data to copy already programmed group settings to two or more Remote Controllers via the C-RF1000 Interface Unit. 3.
12.1.1. Remote controller menu list Group Abbreviation 1. Setting Group No. – Control ON/OFF DVR No.– Channel No. selection 2. Transfer RM RM 3. Erase NO YES 1. Setting Abbreviation No. – Quick display settings 2. Transfer RM RM 3. Erase NO YES Camera Protocol TOA-A TOA-B BOSCH PELCO-D Password Menu 1. Operation level 1 RF RF RF RF Invalid Valid – Password entry 2. Operation level 2 Invalid Valid – Password entry 3. Operation level 3 Invalid Valid – Password entry 4.
12.2. Setting Keys and Display Screen [Keys to be used for settings] LCD screen Displays setting items and contents. Shift/ Menu key FOCUS IRIS Displays the Remote Controller menu on the LCD screen or closes the menu. (Refer to p. 33; Log-In and Log-Out.
12.3. Basic Setting Operations Here, basic operating procedures for each setting item are described. Enter a password to log in to Operation Level 1 and display the Remote Controller’s menu. Refer to p. 33; Log-in and Log-out for the log-in method. 12.3.1.
12.4. Function Settings Follow the instructions in p. 39; Basic Setting Operations to perform the following menu displays and operations. 12.4.1. Group settings Assigning two or more Digital Video Recorders to the same group permits their images to be viewed on a single monitor. Up to 8 groups can be set. Notes • The group setting can only be performed in DVR ID numerical order, and can only be performed in consecutive numbers.
When selecting “Transfer”… 1. Select [GROUP] while the menu is displayed and press the SET key. The setting content is displayed on the second line. GROUP 2 . TRANSFER 2. Select [2. TRANSFER] and press the SET key. 3. Select EITHER [RM RF] or [RM RF] and press the SET key. The “TRANSFERRING...” indication is displayed while data is being transferred, and the “TRANSFER COMPLET” indication is displayed when the transfer is completed. [RM RF] : Transmits data to the interface unit.
12.4.3. Abbreviation (Quick display function) Camera images (DVR, monitor, camera and position numbers) can be displayed in the full screen on the monitor by simply pressing a preprogrammed abbreviation number (numerical keypad entry and the SET key). The abbreviation numbers that can be used for this function are Nos. 1-508 and functions keys F1-F4, totaling 512 possible selections. Quick display setting screen SET D M Abbreviation Nos. 1-508 and F1-F4 1 C P Position No. DVR No. Monitor No. Camera No.
12.4.4. Abbreviation (Function programming) The functions of the Combination Camera and Digital Video Recorder can be programmed into an abbreviation number (1-508 and F1-F4 keys). Note The Combination Camera's protocol must be selected before performing abbreviation number settings. If the protocol is selected, this permits the available functions to be selected for the camera. 1. Select [ABBREVIATION] while the menu is displayed and press the SET key. 2. Select [1. SET] and press the SET key. 3.
When the camera's protocol is TOA-B (Type B)...
12.4.5. Camera Protocol Selecting protocol of the Combination Camera connected to the Digital Video Recorder only displays the abbreviation function that can be used for each protocol. The abbreviation function table is factory-preset to those for the model of TOA-A. Note Multiple combination cameras using different communication methods cannot be connected to a single digital video recorder. Match the communication methods of all connected cameras.
12.4.6. Password The Remote Controller's operation level can be set using passwords. The table below shows the available and unavailable functions of each operation level. Please set the appropriate operation level referring to this table.
[ Passwords and operation levels ] If no passwords have been set, Operation Level is “1.” Refer to the table below if a password has been set. Pattern Password 1 Password 2 Password 3 Operation Level 1 Operation Level 2 Operation Level 3 Set Password Full-Lock 1 Password 1 2 Password 2 3 Password 3 4 Password 1 and 2 5 Password 2 and 3 6 Password 1 and 3 7 Password 1, 2, and 3 : Level after log-out. : No operation level exists since no password has been set.
[ Password Settings ] 1. Select [PASSWORD] while the menu is displayed and press the SET key. 2. Select the operation level and press the SET key. 3. Select [ON] and press the SET key. 4. Enter a password (6-digit number). P A S SWO R D 1 . LEVEL1 ON 5. To continue to set Operation Levels 2 and 3, repeat Steps 2-4. P A S SWO R D 1 . LEVEL1 12.4.7. Focus speed Lens speed when the FOCUS key is pressed can be adjusted in 4 steps. 1. Select [FOCUS SPEED] while the menu is displayed and press the SET key.
12.4.9. Key operation tone The tone generated whenever the key is pressed can be set to sound or not to sound. 1. Select [KEY CLICK ON/OFF] while the menu is displayed and press the SET key. The setting content is displayed on the second line. KEY CL I CK ON / OF F 1 . ON 2. Select the setting content and press the SET key. [Setting Contents] 1. ON The key operation tone is sounded when the key is pressed. 2. OFF The key operation tone is not sounded when the key is pressed. (Factory-preset to ON.
12.4.12. Monitor lock Set the Monitor Lock function for the system in which multiple remote controllers are connected. This restricts operable monitors and eliminates the necessity for switching monitors, allowing malfunctions to be avoided. Using the Monitor lock function in combination with the abbreviation number function makes the abbreviation number settings simple. (Refer to p.41; Abbreviation. ) Set Monitor Lock, as shown in the system example below. 1.
12.4.13. Language Set the language to be displayed on the LCD screen. 1. Select [LANGUAGE] while the menu is displayed and press the SET key. The setting content is displayed on the second line. LANGUAGE 1 . ENGL I SH 2. Select the setting content and press the SET key. [Setting Contents] 1. ENGLISH The English language is displayed on the LCD screen. 2. FRENCH The French language is displayed on the LCD screen. (Factory-preset to 1. ENGLISH.) 12.4.14.
13. CONNECTIONS 13.1. Equipment Connections • Use the CPEV-S cable (twisted pair shielded cable) with diameter larger than 0.65 mm (AWG22) for connection between control terminals. Be sure to connect the shielded cable to the GND terminal. • The control cable length between the Remote Controller and the farthest Digital Video Recorder must be shorter than 1.2 km (3,937 ft). • All connected components must be identical in transmission rate. • When using the supplied modular cable (3 m (9.
13.2. System Example 13.2.1.
13.2.2. Expanded Digital video recorder system (Cascade-connection) REMOTE CONTROLLER INPUT-B Interface Unit C-RF1000 1 REMOTE CONTROLLER 2 3 4 POWER/DVR INTERFACE UNIT C-RF1000 DVR CONTROL OUTPUT-A Supplied modular cable (3 m (9.
13.2.3. Connections between the Remote controller and the Digital video recorder [C-RF1000 Interface Unit Connections] The maximum cable length is 1.2 km (3,937 ft) for each distance between the Remote Controller and the Interface Unit and between the Interface Unit and the farthest Digital Video Recorder. The maximum cable length is 1.2 km (3,937 ft) for each distance between the Remote Controller and the Interface Unit.
[Cable length extension between the Remote Controller and Digital Video Recorder] Power to the Remote Controller is supplied from the AC adapter. The maximum cable length is 1.2 km (3,937 ft) for distance between the Remote Controller and the Digital Video Recorder of which termination switch is set to ON.
15. TROUBLESHOOTING Possible Cause Symptom Remedy Power not supplied to [If the supplied modular cable is used] the Remote Controller. • The Remote Controller is not • Connect correctly. correctly connected to the Digital Video Recorder using the supplied modular cable. • The Digital Video Recorder’s power • Connect to the AC outlet. (The Digital source is not connected to the wall Video Recorder supplies power to the AC outlet. Remote Controller even when in standby mode.
16. OPERATION GUIDE Operation Item Operation Method (Key Operation) Display Status Remark Reference Page • Equipment selection Digital Video recorder selection Numerical keypad (DVR No.) + DVR DVR No. displayed on the LCD and DVR lights. Monitor selection MON Monitor No. displayed on the LCD. Camera selection Numerical keypad (camera No.) + CAM Camera No. displayed on the LCD and CAM lights. Group selection Shift + Numerical keypad (group No.) + DVR Group No. (G_) displayed on the LCD.
Operation Method (Key Operation) Operation Item Display Status Remark Reference Page • Digital Video Recorder operation Forward quick playback Playback + RIGHT Monitor 1 PLAYX2 (X4, X8) Speed changes as the joystick is tilted. (Can be fixed with the SET key.) P. 27 Skip time changes depending on the joystick rotation angle. (Can be fixed with the SET key.) P.
17. SPECIFICATIONS Power Source 12 V AC, 60 Hz (use of the supplied AC adapter) or 12 V DC (supplied from the digital video recorder) Current Consumption 80 mA (use of the supplied AC adapter) Digital Video Recorder RS-485, RJ11 (6P 6C) Control (when the included 3-meters (9.8 ft) modular cable is used) RS-485, screwless connector (3 pins) (with cable length of 3-meters (9.
