In-Stair Speaker is52 In-Stair Speaker O W N E R ’ S M A N U A L
TANNOY is52 Notes 2
O W N E R ’ S M A N U A L CONTENTS 1.0 INTRODUCTION 2.0 WARNINGS 3 6.0 CONNECTIONS 4 6.1 Wire Runs 6.2 Polarity 2.1 Important Safety Instructions 3.0 PRODUCT INDENTIFICATION 4 4.0 UNPACKING 5 5.0 INSTALLATION 5 5.2 Installation without back can 6 5.1 Installation with back can 6 7.0 TROUBLE SHOOTING 7 8.0 WARRANTY 7 9.0 TECHNICAL DRAWINGS 8 10.0 TECHNICAL SPECIFICATIONS 9 11.0 DECLERATION OF CONFORMITY 10 1.0 INTRODUCTION Thank you for selecting Tannoy loudspeakers.
2 . 0 WAR NI NGS 2. 1 I mp o r t a n t S a fe ty In str u cti o n s Before using your is52 instair loudspeaker, be sure to carefully read the applicable items of these operating instructions and the safety suggestions. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • The installer is responsible for the correct installation of the loudspeaker and back can.
TANNOY is52 4 . 0 U NPA CKING Carefully open the shipping carton and check for any noticeable damage. Every Tannoy is52 is tested and inspected before leaving the factory and should arrive in perfect condition. If found to be damaged, notify the shipping company immediately. Only the consignee may institute a claim with the carrier for damage incurred during shipping. Be sure to save the carton and packing materials for the carriers inspection.
5 . 0 I N S TAL L ATIO N 5 . 2 I n s t a l l a t i o n wi th o u t b a ck ca n 1. Lay the loudspeaker cable from the amplifier to the cavity where the loudspeaker will be installed. 2. Te r min a t e and connect the loudspeaker. G o t o sect ion 6. 0 C onnect ions f or w ir ing and connect ion inst r uc tio n s , t h e n r e t u r n to point 3 below. 3. Pl a c e t h e loudspeaker into the stair cavity and at t ach t he loudspeaker br acket s t o t he sur f ace using t he a p p r o p r i a t e fittings.
TANNOY is52 7. 0 T ROU BL E S HO O TING Distorted or unnatural sound can indicate poor connections, defective electronics, damaged source material or speaker failure. If only one of your speakers has poor sound quality, check the speaker wire and audio connections. If you hear obvious distortion from the speakers Immediately lower the volume level of your amplifier.
is52 In Stair Speaker TANNOY is52 9 . 0 T E CH NI CA L DRAW IN G S i s 52 146.0 [5.75"] 432.0 [17.01"] 10.6 [0.42"] 247.5 [9.74"] 413.0 [16.26"] 57.0 [2.24"] 130.0 [5.12"] 75.0 [2.95"] 365.0 [14.37"] i s 52 Back Can 428.2 [16.86"] 400.0 [15.75"] 143.2 [5.64"] 57.0 155.2 [2.24"] [6.11"] 336.5 [13.
TANNOY is52 1 0 . 0 T E CH NI CAL S P E C IFICATIO N S System is52 is52 Frequency response (-3dB) Frequency range (-10dB) (1) (1) System sensitivity (1W@1m) 90Hz - 25kHz 67Hz - 30kHz (2) 88dB (1W = 2.45V for 6Ω) Dispersion (-6dB) 120˚ horizontal, 90˚ vertical Crossover 1.77, 2.27kHz Directivity factor (Q) 5.3 averaged 1kHz to 10kHz Directivity index (DI) 6.
11.0 DECLARATION OF CONFORMITY The following apparatus is manufactured in the UK at Tannoy Ltd of Rosehall Industrial Estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment.
TANNOY is52 Notes 11
02.06.07 R1 T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (0180) 1111 881 T: 00 33 (0)1 7036 7473 E: enquiries@tannoy.com E: inquiries@tannoyna.com E: info@tannoy.com E: ventes@tannoy.com Tannoy adopts a policy of continuous improvement and product specification is subject to change.