User's Manual

[Rear]

10. DC input jack

Connect the power cable of the supplied

AC adapter to this jack.

11. Cable hanger

Hook the power cable onto this part.

12. AF output

Balanced XLR jack, male type (Pin #2: Hot).

S4.04-RX : -20 dBu (maximum)

S4.10-RXA : 16 dBu (maximum)

13. AF output

Unbalanced phone jack

S4.04-RX and S4.10-RXA : 10 dBu (maximum)

14. Volume control (S4.10-RXA only)

Adjust the output level.

15. Antenna input A, B (S4.10-RXA only)

BNC connectors for antennas

Phantom powering for the external

antenna (optional)

For the wireless system covering a relatively

narrow area, use the supplied two rod antennas,

which should be set up at 45° outwards from

a vertical line.

Tip S4.10-RXA receiver gain is continuously adjustable. Should the receiver signal be too high, it will distort

your mixer / amplifier. If the signal is too low, the result will be an increase in general background noise.

Monitor the AF peak LED on the receiver, and adjust the volume control to achieve the best signal

quality.

S4.04-RX

S4.10-RXA