User's Manual

Page 13 – S5.5 Monitoring Software Manual Rev 1.2 for Software Ver 1.0
4.4 Copying an existing file
Click on the 'File', 'Open' menu.
Click on the file you wish to copy using the right hand mouse button. From the Pop-up menu, click
'Copy'. Now right hand click on the area where the files are listed and select 'Paste' from the menu. The
new file will be called "Copy of nnnn.frq" where 'nnnn' is the name of the file you selected. If you then
right click on this filename you can choose 'Rename' from the menu and change the name. Do not
change the ‘.frq’ file extension.
4.5 Deleting a file
Click on the 'File', 'Edit' menu then right click on the file you wish to delete. Select 'Delete' from the pop-
up menu and the file will be removed. Click ‘Cancel’ to close the dialog.
4.6 Transferring file data between the PC and a receiver
Open the frequency data file you wish to transfer to a receiver by clicking “Download file to Rx” from the
‘File’ menu and select the file from the dialog. The file operations window will then appear showing the
data from your file.
Use the drop down list to select the receiver to which you wish to send the frequency data.
Click the button labelled "Send data to Rx". The Status label in the bottom left hand corner of the
window will indicate if the transfer was attempted by showing the number of user parameters that were
sent.
During transfer, the display on the receiver should flash and then update.
Note: File transfer, updates the User custom bank and not the Single custom frequency, this is
updated from the ‘File’, ‘Load’ menu option. The custom bank frequencies can only be
accessed from the receiver front panel.