User's Manual

Page 14 – S5.5 Monitoring Software Manual Rev 1.2 for Software Ver 1.0
Uploading data from a receiver
Click “Upload file from Rx” from the ‘File’ menu. A blank file operations window will then appear.
Use the drop down list to select the receiver from which you wish to upload data.
Click the button labelled "Upload from Rx".
The Status label should read "Number in Set" followed by the number of frequencies. The data grid is
then filled with any data transferred from the receiver.
If you wish to save this data, click on the 'File', 'Save' menu. Give your file a name and then click 'OK'.
Once the file has been saved it can be edited in the same way as any other file and downloaded to any
other receivers