SFX 5.1 Sub manual AW.
SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 2 Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with manufacturerʼs instructions. This apparatus is not suitable for in wall mounting. Introduction Thank you for purchasing this high performance 5.1 8.
SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 3 If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or 14. Warning: To reduce the risk of fire or electric return carriage.
SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 4 The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SFX 5.1 Sub manual AW.
SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 6 Connecting the subwoofer to your system The SFX5.1 system subwoofer may be connected in any one of the following ways: Line levels • Using the subwoofer output on your A/V receiver or decoder connect a single RCA interconnect to either the left or right line input on the subwoofer rear panel. This is the ideal connection type as the sub woofer output contains the low frequency information from all channels.
SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 7 Setting up Ensure the POWER switch is in the OFF position. You can operate the SFX subwoofer in two modes, AUTO and ON. Set to AUTO, the unit remains switched off until a signal is present (power saving), set to ON the unit runs continuously. Connect the SFX subwoofer to a convenient mains socket using the lead and Positioning plug supplied. As the SFX subwoofer produces low frequencies only, it is difficult to detect its location by ear.
SFX 5.1 Sub manual AW.qxd:Layout 1 25/9/07 15:05 Page 8 Subwoofer PERFORMANCE Power output 100 Watts Frequency response (-6dB) 45Hz - 140Hz Driver 200mm (8.00”) paper cone Inputs Twin line or speaker level Power requirements 160VA max Fuse ratings AC100-120V / 60Hz - Fuse: T1.6A L /250V AC 220-240V / 50Hz - Fuse: T800mA L /250V Additional features ON / OFF/ AUTO power function Weight 9.0kg (20.0lbs) Dimensions H x W x D 345 x 250 x 370 mm (13.58 x 9.84 x 14.