User manual

88
11.2. Storing Scene Memory
SCENESETT I N G SAVE
BANK1 5NA M E=_______
SAVE 1 5
SAVE 0 1
SAVE C O M PLETE
15–CERE M O NY
SAVE 1 5
01 1
SCENE
–
ENTER
3
ENTER
7
5
MEMORY
MEMORY
1
PARAMETER
4
PARAMETER
2
6
or
SCENESETT I N G
LO
A
D
Step 1. Hold down the Memory key.
The Scene memory setting screen is displayed.
Step 2. Use the Memory key or Parameter setting knob to
display "SAVE" indication.
Step 3. Press the Enter key to display the Scene memory save
screen.
Step 4. Select with the Parameter setting knob the Scene
memory bank number (01 – 32) to be stored.
Step 5. Set the Scene memory name.
Press the Down shift key to display the Scene memory
name setting screen.
Up to 7 characters can be used to set the name.
Advance to Step 7 when name setting is not required.
Step 6. Press the Up shift key.
The display returns to the Scene memory save screen.
Step 7. Press the Enter key to store the current settings to the
designated Memory bank number.
The set name is displayed on the screen.