OPERATING INSTRUCTIONS UHF WIRELESS MICROPHONE WM-4210, WM-4220

2. GENERAL DESCRIPTION
The WM-4210 Wireless Microphone employs a dynamic microphone element and is suitable for vocal
applications.
The WM-4220 Wireless Microphone employs an electret condenser microphone element and is suitable for
speech applications.
3. FEATURES
• One frequency can be selected from 16 operating frequencies of 690 – 865 MHz.
• An optimized PLL-synthesizer minimizes the oscillation frequency drift resulting from the ambient
temperature or voltage fluctuation.
• Battery lamp indicates battery consumption to prevent the unit from malfunctioning when the battery level
remarkably decreases.
4. HANDLING PRECAUTIONS
• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as
doing so may result in unit failure.
• Never open nor remove the unit case to modify the unit. Refer all servicing to your nearest TOA dealer.
• Take care not to drop the unit onto the floor nor bump it against a hard object as the unit could fail.
• Do not place the unit in locations of high temperature (ex. in a car parked in summer) or high humidity as the
unit could fail.
• Do not use the unit in locations where it is exposed to seawater.
• To clean, use a dry cloth. When the unit gets very dirty, wipe lightly with a cloth damped in a dilute neutral
cleanser, then wipe with a dry cloth. Never use benzine, thinner, or chemically-treated cleaning towel.
• Avoid using a mobile telephone near the wireless microphone in use. Noise could be picked up.
5. NOMENCLATURE
[WM-4210] [WM-4220]
Power ON/OFF switch
Power/Battery lamp
(Orange LED)
Channel select switch
Battery clip