User's Manual

8. CHANNEL NUMBER SETTING

Step 1. Switch off the power. Rotate the microphone grip

counterclockwise to remove it.

Step 2. Using the supplied screwdriver, set the Channel setting

switch pointer to the desired channel number.

Step 3. Replace the microphone grip.

Note: Make sure that the wireless microphone is identical to

the wireless tuner in the channel number. Should the

microphone's setting differ from that of the tuner, the

tuner does not receive the microphone signal.

BANK CHANNEL

Channel selector switch

10. OPERATIONAL HINTS

• The microphone's service distance is 3 – 120 m. When the microphone user moves in a facility, signal

dropouts (momentary losses of signal reception) may be encountered. These dropouts are caused by the

building's architectural designs or materials which block the travel of or reflect the radio signal. If this occurs,

the user needs to change locations for better signal reception.

• The proper operation of your wireless system may be interfered with by other system operating on the same

frequency. In such cases, change the operating frequency of your system. (As to dealing with the

interference, refer to the operating instructions of the wireless tuner.)

• Should you have any questions regarding the use or availability of TOA wireless products, please contact

your local TOA dealer.

9. OPERATION

Step 1. Confirm that the wireless microphone and the wireless tuner are identical in the channel number. If

not identical, turn the power ON/OFF switch to the OFF position, then set the channel number to the

same channel number as the tuner.

Step 2. Turn the Power ON/OFF switch to the ON position. Then, confirm the green LED of the Power/Battery

lamps will light.

Step 3. Turn the Power ON/OFF switch to the OFF position after use.