Manual

ManualsBrandsToa ManualsSafetyC-BC704U

Thank you for purchasing TOA’s Flush Ceiling Mounting Bracket. Please carefully follow the instructions

in this manual to ensure long, trouble-free use of your equipment.

FLUSH CEILING

MOUNTING BRACKET

C-BC704U

INSTRUCTION MANUAL

1. SAFETY PRECAUTIONS .......................... 2

2. GENERAL DESCRIPTION ........................ 3

3. HANDLING PRECAUTIONS ..................... 3

4. INSTALLATION ......................................... 4

5. SPECIFICATIONS ..................................... 8

Accessories ................................................ 8

TABLE OF CONTENTS

Summary of content (8 pages)

PAGE 1
INSTRUCTION MANUAL FLUSH CEILING MOUNTING BRACKET C-BC704U TABLE OF CONTENTS 1. SAFETY PRECAUTIONS .......................... 2 4. INSTALLATION ......................................... 4 2. GENERAL DESCRIPTION ........................ 3 5. SPECIFICATIONS ..................................... 8 Accessories ................................................ 8 3. HANDLING PRECAUTIONS ..................... 3 Thank you for purchasing TOA’s Flush Ceiling Mounting Bracket.
PAGE 2
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference.
PAGE 3
CAUTION Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. When Installing the Unit • To avoid electric shock, be sure to switch off the power before power supply wiring work. • Leave the installation of the unit to your TOA dealer because the installation requires expert experience and skills. The unit may fall off if incorrectly installed, resulting in possible personal injury.
PAGE 4
. INSTALLATION 1. Make a 188 - 192 mm (7.4" - 7.56") diameter hole in the ceiling board. 2. Install 2 anchor bolts: one for fixing the Flush ceiling mounting bracket and another for connecting the safety wire in the attic. Notes • Install the anchor bolt for fixing the Flush ceiling mounting bracket in the center of the 188 - 192 mm (7.4" - 7.56") diameter hole. • An existing anchor bolt, if near the mounting position, may also be used for connecting the safety wire.
PAGE 5
. Passing the Flush ceiling mounting bracket through the mounting hole, place it in the attic, then secure it with 3 ceiling board mounting screws. Turning the ceiling board mounting screws clockwise lowers the ceiling holder, which clamps the ceiling board. Fix the Flush ceiling mounting bracket to the anchor bolt in the attic. Flush ceiling mounting bracket Ceiling holder Ceiling board Turn clockwise. Ceiling board mounting screw 6.
PAGE 6
8. Secure the dome cover to the camera unit. Dome cover fixing screw (supplied with the C-CC704) C-CC704's camera unit Dome cover 9. Attach the decorative frame and camera mounting bracket supplied with the unit to the camera section (camera unit + dome cover).
PAGE 7
10. Connect the safety wire secured to the camera unit to the Flush ceiling mounting bracket. Safety wire 11. Connect the composite cable (connected in Step 6) from the ceiling to the camera unit.
PAGE 8
12. Insert the tabs of the camera mounting bracket attached to the C-CC704's camera section into the slots in the Flush ceiling mounting bracket, then turn the camera unit clockwise until it locks into place. 13. Secure the decorative frame fixing screw hole with the supplied screw. Decorative frame section Decorative frame fixing screw (accessory) 5. SPECIFICATIONS Finish Dimensions Weight Main body: Surface-treated steel plate Decorative frame: ABS resin, light gray, paint ø207 x 144 (H) mm (ø8.