Manual

130
10. PC CONNECTIONS
10.1. Connections between a PC and the Unit
Connect a PC, the D-2008SP, and the D-2012C to a switching hub using LAN straight cables individually.
D-2008SP
D-2012C
LAN connection
terminal
LAN connection terminal
PC with the D-2000 Setting
Software installed
Switching hub
Category 5 or higher shielded
twisted pair cable for LAN
(with RJ45 connectors)
10.2. Method to Enable Communications between the PC and the Unit
Step 1. Perform network settings by selecting "Communication Comm Setting..." from the menu.
(See the next page "Connection Settings.")
Step 2. Make communications in any of the following methods. (See p. 13.)
2-1. Make communications by selecting "Communication Connect..." from the menu. (See p. 144.)
2-2. Make communications by selecting "Communication Bulk Transmission..." from the menu.
(See p. 145.)
2-3. Make communications by selecting "Communication Bulk Receiving..." from the menu.
(See p. 145.)