Manual

165
[Crossover Settings]
Setting Item Setting Range Initial Value
Cutoff Frequency
20 Hz
to
20 kHz, 1/24
octave steps – – –
Slope Through, 12 dB/octVQ, 24 dB/octVQ
– – –
6 dB/oct, 18 dB/octVQ,
12 dB/octBS,
12 dB/octBW,
12 dB/octLR,
18 dB/octBS,
18 dB/octBW,
24 dB/octBS,
24 dB/octBW,
24 dB/octLR
Q
– – –
0.500
–
2.563 0.500
–
2.563 0.500
Q2
– – –
0.500
–
2.563 0.500
Gain
–
15 to +15 dB, 0.1 dB steps 0 dB
Polarity NORMAL, INVERSE NORMAL
Note: The initial value of the cut-off frequency differs depending on the crossover combination settings.
Combination Cut-off Frequency Initial Value
Single Ch.N HPF: 20 Hz, LPF: 125 Hz
2way Ch.N HPF: 20 Hz, LPF: 2.9 kHz
Ch.N+1 HPF: 2.9 kHz, LPF: 20 kHz
3way Ch.N HPF: 20 Hz, LPF: 500 Hz
Ch.N+1 HPF: 500 Hz, LPF: 2.9 kHz
Ch.N+2 HPF: 2.9 kHz, LPF: 20 kHz
4way Ch.N HPF: 20 Hz, LPF: 125 Hz
Ch.N+1 HPF: 125 Hz, LPF: 1.25 kHz
Ch.N+2 HPF: 1.25 kHz, LPF: 8 kHz
Ch.N+3 HPF: 8 kHz, LPF: 20 kHz