Owner manual

(10) Comp ON/OFF button

Displays the ON/OFF setting status of the compressor in each channel. Press this button to turn on or off

each compressor.

8.4.2. Auto-leveler function settings (available only to the input channel)

(1)(2)

(4) (5) (6) (7) (8)(3)

(1)

(4)

(5)

(6)

(7)

(8)

Clicking the [Leveler All] tab causes the setting screen for all channels set to auto-leveler mode to appear.

(1) Mode selection button [Comp/Leveler]

Displays the compressor/auto-leveler mode. Mode selection can be performed for individual channels.

All input channels are set to compressor mode by default. Press this button to select the auto-leveler

mode, and press it again to select the compressor mode.

Note

At the time of mode selection, each parameter of compressor and auto-leveler functions returns to the

initial value.

(2) Auto-leveler target level handle

Click and drag this handle up and down to change the auto-leveler target level.