Owner manual

78
20. SPECIFICATIONS
20.1. Software Specifications
Operating System: Microsoft Windows 98 SE/Me/2000 and Windows XP
Preset Memory: 16 memories
20.2. Communication Specifications
Communication Method: RS-232C
Transmission Rate: 115200 bps (38400 bps, 19200 bps, 9600 bps)
Data Bit: 8 bits
Stop Bit: 1 bit
Parity: Non-parity
Connection Cable: RS-232C straight cable
20.3. Setting Items and Setting Ranges
Note: Underlined parameters are factory-preset.
20.3.1. Signal processing box
[Input and Output/Trim Settings]
Setting Item Setting Range
Input Channel Gain –∞ to +10 dB
Input Trim Gain –15 to +15 dB (0 dB
), 0.1 dB steps
Input Trim Polarity NORMAL, INVERSE
Input Channel Group Trim Gain –∞ to +10 dB, 0.1 dB steps
Output Channel Gain –∞ to +10 dB (0 dB
)
Output Channel Group Trim Gain –∞ to +10 dB, 0.1 dB steps
[High-Pass Filter Settings]
Setting Item Setting Range
Cutoff Frequency 20 Hz – 20 kHz (60 Hz), 1/24 octave steps
Slope 12 dB/oct
Q 0.500 – 2.563 (0.707
) (51 points)
ON/OFF ON, OFF
[Equalizer Settings]
Setting Item Setting Range
Gain –15 to +15 dB (0 dB), 0.1 dB steps
Center Frequency 20 Hz – 20 kHz (Low: 630 Hz, High: 1.25 kHz), 1/24 octave steps
Q 0.267 – 69.249 (4.318) (96 points)
ON/OFF ON, OFF
[Compressor/Auto-Leveler Mode Settings]
Setting Item Setting Range
Compressor/Auto-Leveler Mode COMP, LEVELER