User Manual

110 VAC, 50/60 Hz
95 W (120 VA)
10 lines each of R (Attenuator-free), N (Normal), and C (Common),
M3.5 screw terminal
(Maximum connectable wattage per line: 140 W for 70 V line, and 200 W for 100 V line)
ø5 mm miniature tubed fuse 0.5 A x 10 preinstalled (must be replaced depending
on the connected load capacity)
EL (automatic fire alarm system) 1-10, EF (automatic fire alarm system), and EC,
M3.5 screw terminal
(Open voltage: 24 VDC/Short-circuit current: 200 mA for both EL and EF)
Emergency RM audio inputs 1-4, 0 dBV, 600 Ω, M3.5 screw
Emergency RM power supply 1 and 2: 24 VDC (total current of both terminals 1 and 2: 5 A),
M3.5 screw terminal
Monitor output: 0 dBV, 600 Ω, M3.5 screw terminal
Emergency RM BUS1-4: RS-485, 9,600 bps, M3.5 screw terminal
Emergency start input: M3.5 screw terminal
CPU off input: M3.5 screw terminal
Battery 1 and 2 inputs: M3.5 screw terminal
Check SW input: M3.5 screw terminal
General RM power supply: 24 VDC, 0.5 A, M3.5 screw terminal
General RM BUS: RS-485, 9,600 bps, M3.5 screw terminal
(RM-1200)
AUX control inputs 1-15: Open voltage: 24 VDC, short circuit current: 5 mA,
M3.5 screw terminal
(RM-1100)
Chime start input: Open voltage: 24 VDC, short-circuit current: 5 mA,
M3.5 screw terminal
Output during broadcast: Open collector output, rated voltage: 30 VDC,
current capacity: 0. 1A, M3.5 screw terminal
Output during operation of remote control unit:
Open collector output, rated voltage: 30 VDC,
current capacity: 0.1 A, M3.5 screw terminal
24 V IN, M4 screw terminal
24 V OUT, M4 screw terminal
Emergency DS activation output: 24 VDC, 0.1 A, M4 screw terminal
Emergency DS control input: 24 VDC, 5 A, M4 screw terminal
Battery check output (up to 50 DS-029Bs connectable):
Open collector output, rated voltage 30 VDC,
current capacity: 0.5 A, M4 screw terminal
Battery fail input: Open voltage: 24 VDC, short-circuit current: 5 mA,
M4 screw terminal
52
• Junction Panel JP-0410 (L version)
Power Source
Power Consumption
Speaker Line
Line Short Protection
Automatic Fire Alarm
System Input
Emergency Remote
Control Unit
Input
Output
Control
General Remote
Control Unit
Output
Control
Power Connection
Section
Input
Output
Control