Owner's manual

21
7.1. How to Divide the Speaker Lines of the Junction Panel
Junction panel's power amplifier terminals can be divided for a group of consecutive five lines.
For multi-origination broadcast, remove jumper wires on the power amplifier terminals so that the outputs of
the power amplifier panel are divided for each broadcasting zone.
• The 10-zone Expansion Junction Panel JP-039-10 is not equipped with terminals C3, C4, H3, and H4.
• Remove jumper wires from both C and H terminals depending on the combinations.
GND C1 C2
H1 H2
AMP
FAULTFAULT
BATTERYGEN DSEMG DS
CHECKCTRL + CTRL + ACTI + ACTI +
CHIME
OUTOUTIN
TIMER
2
EMG
24 V
24 V
ATT
FREE
Jumper wires
POWER AMPLIFIER
C1 C2 C3 C4 H1 H2 H3 H4
JP-039-20 rear-mounted terminal block
JP-0410 rear-mounted terminal block
20-zone Expansion Junction Panel
Junction Panel