Owner's manual

27
7.6. IM-011 Connections
7.6.1. Rear view diagrams and block diagrams
Notes
• Be sure to connect the EP-0510's Emergency/General output to Audio Input 1 of the "Address 0" IM-011
Panel connected to the power amplifier panel. Wrong connections disable the emergency broadcast
function.
• Only the Audio Input 1 signal of the "Address 0" IM-011 Panel is output when in emergency broadcast mode.
1234
1234
1234
1234
1
2
3
4
1
1234
1234
2
3
4
EP-0510's rear panel
Control cable attached
to IM-011
Connect Audio Input 1 of the "Address 0" Input Matrix Panel IM-011 to the
Emergency/General output of the Integrated Control Panel EP-0510.
Block diagram
Audio
input
Expansion
audio input
Audio
output
Expansion
audio output
IM-011's rear panel
24 VDC input
(Connect this input to the DC Power Supply Panel's 24 VDC OUT terminal.)
External control input
(Used for manual control. Not used in combinations with the FS-970 series.)
Expansion
audio input
Expansion
audio output
Audio
input
Audio
output