Owner's manual

9.2.2. Connections

• Connecting the Monitor Panel to the Integrated Control Panel EP-0510 permits emergency broadcast to be

monitored at the specific volume level regardless of the volume control setting. When the PA microphone

attached to the EP-0510 is used, the monitoring level automatically lowers to prevent feedback.

• For ten input circuits, by changing the jumper connector position, individual power amplifier or line output

levels can be selected. (All inputs are set for the power amplifier output level at the factory.)

• All of the ten input circuits can be simultaneously switched to the power amplifier output levels of 50 V, 70 V

or 100 V.

12345 678910

Yellow

Orange

Red

Brown

MP-011 top view (case removed)

MP-011 rear view

MP-0510 rear panel

Jumper connector

(Factory-preset position)

Printed circuit board

100 V, 70 V, 50 V position

1 V (line level) position

To each power amplifier

output or line output

MP-011 power supply

These cables are supplied

with MP-011.