Installation Instruction Manual

Page 13 – S5 Wireless Microphone Installation Guide Rev 1.5
Pilot Tone
The S5 series has the ability to
disable the pilot tone as a means of
either identifying outside interference
or allowing compatibility with non-pilot
tone devices. The default factory
setting is ON.
To disable Pilot Tone press the “Jog-
Wheel” to go to MAIN MENU. Rotate
till RX SET is underlined and push to
go to the RX SETTINGS menu.
Rotate the “Jog-Wheel” to underline
PILOT and press to uncheck the box.
Rotate the “Jog-Wheel” to exit this
screen, and press to return to the
main screen.
Phantom Power
DC added to the antenna inputs for
powering head amplifiers. The default
factory setting is OFF. Push the “Jog-
Wheel” to show the MAIN MENU.
Rotate the “Jog-Wheel” to underline
RX SETTINGS, and push to show the
next menu. Rotate to underline
PHANTOM, and push. Press to check
the PHANTOM PWR box. Rotate and
then press to choose EXIT and return
to the main screen.
LCD Contrast
Push the “Jog-Wheel” to bring up the
MAIN MENU. Rotate the “Jog-Wheel”
to underline RX SETTINGS. Rotate to
underline LCD and push, then rotate
the “Jog-Wheel” to alter the LCD
CONTRAST. Push to exit and return to the main screen. The unit will return to
the main screen automatically if there is no user intervention for approximately
2 seconds. Any change you have made will be saved.