Installation Instruction Manual

Page 18 – S5 Wireless Microphone Installation Guide Rev 1.5
6. Beltpack AF Gain Adjusment
Turn the transmitter on and wait for the flashing “decimal point” on the LCD to
stop flashing. Press the “Up” or “Down” buttons firmly to increase or decrease
the AF gain. There are 10 steps with “0” being minimum.
7. Frequency Adjustment
Turn the transmitter on and adjust the frequency while the “decimal point” is
flashing (approx 6 secs) via the “Up” or “Down” buttons. When the correct
frequency is selected, turn the transmitter off then on again to activate the
newly selected channel.