Installation Instruction Manual

Page 7 – S5 Wireless Microphone Installation Guide Rev 1.5
Receiver Frequency Selection
Frequency Selection Options
1. To change the selected channel in BANK1
Press and hold the “Jog-wheel” for
approximately 3 seconds if the
receiver is not in mute to enter the
MAIN MENU. You will enter the
MAIN MENU immediately if the
receiver is in mute.
With FREQ SELECT underlined
press the “Jog Wheel”.
Rotate the “Jog Wheel” till BANK is
underlined and press.
Press to select BANK1.
Rotate the “Jog-wheel” to change
the channel.
Finally, press to select the new
frequency. (See the attached
frequency table).