User guide

When Installing the Unit

• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the

heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric

shock.

• Note correct polarity (positive and negative orientation) when connecting the power supply cord. Reversed

polarity connections will cause damage to the unit.

• To avoid electric shocks, be sure to remove its power supply cord from the wall outlet when making

connections.

2.2. Applicable to VM-3240VA, VM-3360VA, VM-3240E and VM-3360E

When Installing the Unit

• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power

cord in close proximity to heaters, and never place heavy objects -- including the unit itself -- on the power

cord, as doing so may result in fire or electric shock.

• Be sure to ground to the safety ground (earth) terminal to avoid electric shock. Never ground to a gas pipe

as a catastrophic disaster may result.

• The apparatus shall be connected to a mains socket outlet with a protective earthing connection.

• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be easily

accessible.

• An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in the

electrical installation of the building.

• Terminals with the symbol are Hazardous Live and the external wiring connected to these terminals shall

be installed by instructed person or shall be done with ready made cords or leads.

• The apparatus must be securely attached according to instruction manual to prevent injury.

When the Unit is in Use

• Should the following irregularity be found during use, immediately switch off the power, disconnect the power

supply plug from the AC outlet and contact your nearest TOA dealer. Make no further attempt to operate the

unit in this condition as this may cause fire or electric shock.

· If you detect smoke or a strange smell coming from the unit.

· If water or any metallic object gets into the unit

· If the unit falls, or the unit case breaks

· If the power supply cord is damaged (exposure of the core, disconnection, etc.)

· If it is malfunctioning (no tone sounds.)

• When replacing the fuse, be sure to use the supplied one. Using any other fuse than supplied may cause fire

or electric shock.

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

WARNING

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

CAUTION