User's Manual

7.2. Using Transmitter

Step 1. Plug the microphone's plug into the input

connector as illustrated.

Step 2. Conrmthatthewirelessmicrophoneandthe

wireless receiver are identical in the bank and

channel number.

If not identical, turn the power switch to the

OFF position, then set the bank and channel

numbers to the same ones as the receiver.

Step 3. Turn the Power switch to the ON position.

Then, conrm the battery checker will light

green or orange.

Step 4. Turn the Power switch to the OFF position

after use.

8. FUNCTION SETTINGS

8.1. Setting the Bank and Channel Numbers

Step 1. Turn off the power switch.

Step 2. Detach the battery cover.

Step 3. Using the supplied screwdriver, set the bank

selector switch’s pointer to the desired number,

and set the channel selector switch’s pointer

likewise.

Step 4. Replace the battery cover.

Plug lock

Secure the connection with the plug lock.

Screwdriver

(accessory)