User Manual Product Name: Data processing Machine Model Name: TT-200/TK-200 14” Terminal Model Name: TT-201 14” Terminal + 8” attached GFD
Model Name: TT-202 14” Terminal + 8” detached GFD Simplified Setting It only takes a few steps to turn on this terminal: Press the power button, and the screen will light up. Follow the instructions shown on the start-up screen. Two internet access modes are available for you to select. 2. WIFI setting - Press the [Setting] button, start WLAN to enter the WLAN search interface, and search for the available WLAN hotspots. - Press the WLAN to be connected.
Specifications Terminal Operation system Android 7.1 Processor Rockchip RK3399 LCD 14-inch 1920x1080 resolution Memory 16GB ROM + 4GB RAM WiFi Dual-band WiFi, 802.11 a/b/g/n(2.4GHz/5GHz) supported Bluetooth Bluetooth 4.0 BLE supported Camera 5M FF MIPI Camera Speaker 2W 1 x RJ45 LAN port, 2x USB TypeC port, 1x HDMI-D port, External ports Power adaptor 1x customized TypeC port, 3 x Micro-USB port Input: AC 100〜240V/2.5A Output: DC 24V/4.
Adapter shall be installed near the equipment and shall be easily accessible The operating temperature of the device is between -10°C to 40°C Recommendation Do not use the device near water or in humid environment. Keep liquid from falling onto the terminal Do not use the device in extremely cold and hot environment, e.g.
FCC ID: 2AMNG-TT200 IC Regulation This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
including radio local area networks (RLANs), shall be restricted to indoor use. BE HR PL BG IT PT CZ CY RO DK LV SI DE LT SK EE LU FI IE HU SE Max. BT 2402-2480 MHz: 9 dBm radio-frequency BLE 2402-2480 MHz: 5 dBm power 2.