Tall Can Opener USE AND CARE GUIDE MODELS 2249/2249IB/2249MEX •H and le •H and s larg ec s fr •R ans ee em o wi o per vab •B atio th eas uilt le c e -in •M kni utting n agn as etic fe sh arp semb lid ly en hol der er ? Questions Call toll free 1-800-947-3744 Monday – Friday, 8:00 a.m. - 5:30 p.m. CST www.toastmaster.
READ AND SAVE THESE INSTRUCTIONS WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. Please follow all safety instructions. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following: ◆ Read all instructions before using appliance.
CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Extension cords are available from local hardware stores and may be used if care is exercised in their use. If an extension cord is required, special care and caution is necessary. Also the cord must be: (1) marked with an electrical rating of 125 V and at least 10A., 1250 W.
Knife Sharpener Scissors Sharpener Cord Storage FIGURE 2 Pivot Hole Pivot FIGURE 3 FIGURE 4 Using The Can Opener See CARE AND CLEANING for assembly instructions. 1. Remove all packaging materials before using. 2. Place the can opener on a level surface and plug into 120V~60 Hz electrical outlet. 3. Hold can approximately level. 3.
4. Raising lever, place can under guide bar and against geared wheel, see Figure 1. 5. Press down on lever to pierce lid of can. This also starts the cutting action. Let go of lever and can will stop automatically when opened. 6. Grasp the can, then raise the lever up from the can. 7. Slide the lid away from the magnet. Use caution to avoid injury from sharp edge of lid. Hint For Using The Can Opener ◆ To open extra tall cans, place can opener at edge of counter before wedging can in position for opening.
Hints for Using The Knife And Scissor Sharpener ◆ Be sure that blades are clean and free of grease. Greasy or wet blades may coat the grinding wheel and the blade will not sharpen satisfactorily. ◆ Do not attempt to sharpen hollow ground or serrated blades. ◆ If the knife has a curved tip, raise the knife handle slightly at the end of each sharpening. ◆ Uneven sharpening may occur if you force the knife blade against the Grinding Wheel.
3. To replace the lever, hold the can opener facing you with the lever in the lifted position and slide the pivot into the pivot hole. Push the lever to the left until it snaps into place (see Figures 3 and 4). Lower the lever back onto the top of the can opener. 4. Store cord in cord storage (see Figure 2). Note: Cutting blade is sharp, use caution. Any servicing requiring disassembly other than the above cleaning must be performed by a qualified appliance repair technician. 6.
LIMITED ONE YEAR WARRANTY Warranty: This Toastmaster® product is warranted to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product.
Keep Dated Sales Receipts for Warranty Service. Keep this booklet. Record the following for reference: Date purchased _______________________________________________ Model number _______________________________________________ Date code (stamped on bottom)________________________________ EVERYBODY EATS. It’s a fact of life. But sometimes preparing meals can become a chore.
Tall Can Opener USE AND CARE GUIDE MODELS 2249/2249IB/2249MEX •H and le •H and s larg ec s fr •R ans ee em o wi o per vab •B atio th eas uilt le c e -in •M kni utting n agn as etic fe sh arp semb lid ly en hol der er ? Questions Call toll free 1-800-947-3744 Monday – Friday, 8:00 a.m. - 5:30 p.m. CST www.toastmaster.
