Sandwich and Panini Grill Specification Sheet

Foodservice Equipment
Job Item#
Toastmaster
®
5600 13th Street, Menominee, MI 49858 • www.toastmastercorp.com
Toll Free: 1-800-338-9886 • Telephone: [phone] • Fax: [phone]
Sandwich and Panini Grills
Natural Aluminum Surface: A710674, A710663, A710666
Non-Stick Coated Surface: A710SA674, A710SA663, A710SA666
Grooved Surface: A710PA674, A710PA663, A710PA666
Sandwich and Panini Grills - Models A710, A710SA & A710PA
Application:
Toastmaster A710 Series Sandwich
and Panini grills are designed to
uniformly grill both sides of a
sandwich at the same time. To add to
the grills’ versatility, the bottom grill
can be heated alone.
General Information:
Light-duty elecric grill with
simultaneous top and bottom grilling
eliminates flipping sandwiches.
Overall dimensions are:
17” W x 18-1/2”D x 11 3/4” H
Neoprene feet are provided.
• Models A710 and A710S feature
smooth upper and lower grill plates.
• Model A710P features grooved
upper and lower plates.
Construction:
Construction is of formed and welded
sheet steel. Grill plates are of cast
aluminum. An 8 oz. capacity grease
receptacle at the rear is easily
removable for emptying and cleaning.
Model A710 features grill plates with a
natural aluminum finish. Models
A710S and A710P feature grill plates
with a DuPont SilverStone Supra
®
nonstick flouropolymer coating.
Capacity:
Grills up to 4 sandwiches at one time.
Heating:
A preformed tubular heating element
is clamped beneath the grill on each
of the top and bottom grill plates.
Controls:
Controlled by an adjustable
thermostat with a range of 150
o
F to
450
o
F with an “OFF” position. A three
position switch is provided to turn the
unit off, operate the bottom grill only,
or operate both top and bottom grills.
The top grill can be adjusted from
paper-thin to thick sandwich heights
and locked into place to provide
consistent result.
Electrical:
Total rated input is 1.65 KW (0.65 KW
top element, 1.0 KW bottom
element). Available in 120V, 208V or
240V. All units are single-phase and
are equipped with a 3 foot (914mm)
cord and NEMA plug. Refer to the
electrical specifications table on the
reverse side of this sheet.
Coating:
Model A710 features grill plates
with a natural aluminum finish.
Models A710S and A710P feature
grill plates with a DuPont
SilverStone Supra
®
nonstick
fluoropolymer coating.
SilverStone Supra
®
is the most
durable nonstick system of the
DuPont SilverStone
®
family of
nonstick coatings. The coating was
designed for small electric
appliances and top-of-range
cookware, and works well for a
variety of commercial food
processing applications where
resistance to heat and abrasion
are important. It three-coat
application system complies with
FDA regulations governing direct
food contact.
SilverStone Supra
®
is a
registered trademark of DuPont.
All rights are reserved.
Warranty:
Warranted for one year covering
parts and labor. Call factory for
warranty authorization.
Model Shown: May ship UPS
Standard Features:
• Adjustable from paper
thin to 2” thickness
• Top locks at desired
thickness
• Use top & bottom or
bottom heat only
• Grease receptacle
• Handles for portability
• Bottom cook surface
12-7/8” D x 14-1/16” W
• Top cook surface
12” D x 13-1/16” W
A710674
A710SA674
A710PA674