CONVECTION OVEN Omni Tabletop Oven Models XO-1N Installation and Operation Instructions Rev. - November. 26, 2012 XO-1N is a registerd trademark of Toastmaster, A Middleby Company. All rights reserved.
SAFETY SYMBOLS CAUTION These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. WARNING RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Toastmaster factory supplied parts relieves the manufacturer of all liability. Toastmaster reserves the right to change specifications and product design without notice.
PROBLEMS, QUESTIONS or CONCERNS Before you proceed consult you authorized service agent directory or Call the Toastmaster Technical Service & Parts Department at 314-678-6347. TABLE OF CONTENTS Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About Your Toastmaster® Equipment. . . . . . . . . . . . . . . . . . . 1 Receipt And Installation . . . . . . . . . . . . . . . . . . . . . . . . . .
CONSTRUCTION: All Ovens of the XO series are constructed of stainless steel both inside and outside. All of the exterior shell or frame members and the internal shells are welded to provide long life construction, durability and rigidity. Components such as temperature controls, timers, switches, motors, heating elements and others are thoroughly tested before shipment. On-going research and development projects are used to introduce the latest and most dependable parts.
TOASTMASTER® MODEL XO–1N: The TOASTMASTER® XO–1N is electrically powered and operated, and generally does not require a hood. However, the final decision as to hood requirements will always rest with your local authorities. The XO–1N can be used for the following bakery products: • Breads · Pies · Pastries • Rolls · Croissants · Cakes • Muffins · Pizza · Cookies and many other miscellaneous products.
RECEIPT AND INSTALLATION RECEIPT: It is essential to inspect the unit immediately when it arrives. TOASTMASTER® has placed instructions on the packaging to help avoid damage in transit. However, negligent handling can produce hidden damage. These steps should be followed: A. Inspect the entire perimeter of the package for damage or punctures to the packing material. This may indicate damage to the unit inside. Call any and all damage to the attention of the delivery person. B.
INSTALLATION AND INITIAL START–UP: A. Check to determine that the power source is the same voltage and phase as that indicated on the label on the side of the unit. B. Attach the included Appliance Legs to the bottom of the unit. Each Leg stud screws into a threaded hole in each corner of the base. C. Position the unit where it is to be operated and adjust the Appliance Legs so the unit stands level and solid.
OPERATING INSTRUCTIONS The quality of the product you take from your TOASTMASTER® XO–1N Oven depends on several factors: • Initial product quality • Proper storage and handling • Proper preparation and proofing • Correct baking time • Correct baking temperature Non-yeast products are part of many baking programs. Some of these products are in frozen form when received, such as cookies and puff pastry.
MAINTENANCE AND CLEANING GUIDE MAINTENANCE: TOASTMASTER® equipment is designed to last for years of useful service. Careful consideration is given in selecting components for durability, performance and ease of maintenance. For example, the Oven Motor has sealed bearings and never needs to be lubricated. While TOASTMASTER® equipment is designed for minimum care and maintenance certain steps are required by the user for maximum life and effectiveness: • Proper installation of the equipment.
CLEANING: Your XO–1N should be cleaned daily and as soon as possible after a spill has occurred. It is essential to maintain a clean unit, especially if the public views the unit in your place of business. The following should be used for cleaning: A. The stainless steel exterior may be cleaned with any good stainless steel cleaner or polish, or with hot soapy water followed by a clear rinse if it is very soiled. B.
SERVICE AND REPLACEMENT GUIDE Your TOASTMASTER® XO–1N has been designed to be serviced quickly and easily. In fact, any individual with average mechanical ability can do the work. Call TOASTMASTER® at (906) 863-4401 and ask for our Service Department to order replacement parts, ask questions, or offer comments. Our Service Department is available to you Monday through Friday from 8:00 a.m. to 4:30 p.m. (CST) should you find yourself with a situation or problem other than we have outlined.
DOOR TEST PROCEDURE: A. Cut one or two strips of paper approximately 1” wide and 8” to 10” long. B. Open the Door slightly, insert a strip of paper between the Gasket [35] and Door and close the Door. C. Slowly pull the paper strip out. You should feel some resistance as you pull the strip from between the Gasket and Door of a properly adjusted Door. Test the fit at regular 2” to 3” intervals around the entire Door. 1.
TOASTMASTER® EQUIPMENT WARRANTY THIS IS THE STANDARD WARRANTY THAT APPLIES TO ALL NU-VU® EQUIPMENT WITH THE FOLLOWING EXCEPTION: DUE TO IT’S SMALL SIZE THE XO–1N WILL NOT ALLOW THE CHARGING OF TRAVEL TIME BY A SERVICE AGENCY. IF YOUR XO–1N OVEN REQUIRES THE ATTENTION OF A SERVICE TECHNICIAN WE REQUEST THAT YOU TAKE THE UNIT TO YOUR APPROVED LOCAL SERVICE AGENCY YOURSELF. TOASTMASTER® products are warranted against defects in workmanship and materials. No other express warranty, written or oral, applies.
EXTENDED WARRANTY: Available at an additional charge. Please ask for a quote depending upon warranty requested. WARRANTY LIMITATIONS: TOASTMASTER® will pay for parts and labor under warranty if there is a defective component, but not for: • Parts damaged in shipment beyond the confines of the TOASTMASTER® factory.
November 26, 2012 Model: XO-1N Tabeltop Convection Oven Reference# Description Part # ELECTRICAL COMPONENTS: 1 Power Cord Assembly (120V) 2E-50-0375 4 Motor Assy w/blower wheel (120V) 2U-250-1059 5 Heating Element (120V) 2N-60-0205-A Cooling Fan (120V) 2U-50-0049 Cooling Fan (240V) 2U-97525 8 Thermal Overload Safety (Auto Reset) 2T-66-1014 9 Door Microswitch PS-252-2004 10 Fuse Holder 2E-50-0368 11 20A Fuse 2E-50-0369 12 Relay, DPDT, 20 amp, (120V) 2E-50-0433 13 Relay, 3DPD
