Models: E17UAC E17UAC-INS E6UAC E6UAC-INS
TOASTMASTER Revised: 31 Dec 2010 Model E17UAC Warming Cabinet General Information ........................................................................................................... 1 Unpacking .......................................................................................................................... 1 Maintenance ....................................................................................................................... 1 Operating .......................................
GENERAL INFORMATION The E17UAC or E6UAC will hold food hot at a constant temperature, and supply humidity for proofing when the application applies. This cabinet is not a cooking appliance. UNPACKING Examine the interior of the unit to make sure all packing materials are removed before the unit is plugged into an electrical outlet. Examine the interior and exterior to determine whether any damage was incurred during delivery. If so, notify the carrier immediately to file a damage claim.
OPERATING INSTRUCTIONS 1. Push ON/OFF rocker switch to “ON” position. 2. Push HEAT/PROOF switch to HEAT for heating. 3. Turn HEAT thermostat knob fully clockwise for pre-heat. 4. Allow 45 minutes for pre-heating, then turn thermostat to desired setting. 5. For proofing, push HEAT/PROOF switch to PROOF. 6. Adjust the heat and humidity thermostat knobs to control desired temperature and humidity. Allow 45 minutes for pre-heating.
PARTS LIST FOR E17UAC ITEM DESCRIPTION PART NUMBER 1 ........................................................... Heat/Proof Switch ........................................ 2E-50-1357 2 ........................................................... Thermostat (Heat) ........................................ 2T-66-1158 3 ........................................................... Thermostat (Proof) ........................................ 2T-66-1158 4 ......................................................
Electrical Schematic E17UAC Heater Proofer PAGE 4
SERVICE SPECIFICATIONS – E17UAC The Heater Proofer is an aluminum transport cabinet with heaters to function as a hot food holding cabinet, and/or as a proofing cabinet. The heater, or heat drawer, is slid into place on the floor of the cabinet. An electrical socket on the back of the drawer is provided to accept the supplied power cord, which is plugged into the drawer through an access hole in the back of the cabinet.
EQUIPMENT WARRANTY NU-VU Food Service Systems and Toastmaster Manufacturing warrant to the initial purchaser that all NU-VU and Toastmaster products shall be free from defects in material or factory workmanship, under ordinary use for the purpose for which it is designed, for a period of one (1) year from the date of shipment from the manufacturing facility. At our option, any equipment will be repaired or a replacement part furnished FOB our factory.
