Use & Care Manual

59.
Specifications
Power Supply
Power Heater
Consumption
Kneading Motor
Dimension (WxDxH)
Weight
Messages Reason Solution
0:00 Cycle is complete. Press Start/Stop button to cancel.
(Colon flashing) Keep Warm is engaged.
E:01 Unit is too hot. Press Start/Stop button to cancel.
signal beeping Open cover, remove bread pan and
allow unit to cool with cover open.
L:LL Room temperature Press Start/Stop button to cancel.
signal beeping is too low. Place bread maker in a warm room
(Below 59°F) and allow to warm up.
Display Blank Power has been Unplug unit and plug back into
interrupted. outlet. Unit must be reset.
H:HH Short circuit of Send bread maker into Salton,
signal beeping sensor Inc. for repair or replacement.
120 V ~ 60 Hz
400W
25W
Approx. 9.5”x12”x12.3”
Approx. 9.5 lb.
58.
Bread Maker Use and Care Guide
Display Information
Always use the bread maker in a room that is free of drafts and is at least 55°F/13°C, but not warmer
than 90°F/32°C. Do not use bread maker in an unheated garage, outdoors, near a heat vent, or in
direct sunlight.
Generally the display window will tell you what is happening with your bread maker. Here are some
points to consider.