ELECTRIC HOTPLATES MODEL TMHPE, TMPHF Installation and Operation Instructions 2M-Z12999 Rev. - Oct. 1, 2009 TMHPE TMHPF is a registerd trademark of Toastmaster, A Middleby Company. All rights reserved.
SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Toastmaster factory supplied parts relieves the manufacturer of all liability. Toastmaster reserves the right to change specifications and product design without notice.
GENERAL OPERATING INSTRUCTIONS CAUTION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. For equipment to be used by the general public, please contact the factory. The Toastmaster models TMHPE & TMHPF Electric Hot Plates are equipped for the voltage indicated on the nameplate mounted on the front panel.
CLEANING The exterior surfaces can be kept clean and attractive by regularly wiping with a clean soft cloth. Any discoloration can be removed with a non-abrasive cleaner. For model TMPHE, the heating elements may be raised for access to the drip pans, which may be removed for cleaning and the bottom pan may be removed by sliding pan forward. REPLACEMENT OF INFINITE CONTROL BE SURE POWER IS DISCONNECTED BEFORE ATTEMPTING TO SERVICE UNIT. 1. Pull control knobs on front panel forward to remove. 2.
Warranty Statement This warranty is effective on all Toastmaster equipment sold on or after July 1, 2006, and supersedes all previous warranties. Toastmaster warrants equipment that it manufactures to be free from defects in material and workmanship. Toastmaster’s obligation is limited to repairing or replacing, at Toastmaster’s option, without cost to the customer, any part found to be defective, as well as any labor or material expense required to replace the part.
2 1 5 4 6 8 7 9 10 12 3 13 11 14 15 16 18 20 19 21 17 22 23 24 26 25 MODEL: TMHPE, TMHPF Electric Hotplates SK2433 REV - 9/1/09
PARTS LIST MODEL October 1, 2009, Rev. - TMHPE, TMHPF, Electric Hotplates Fig No.
RDL CK. DATE 09/01/2009 TMHPE TMHPF BACK ELEMENT FRONT ELEMENT AWG #10 AWG #10 FOR SUPPLY CONNECTI0NS USE GA. SHOWN (OR LARGER) AWG #10 17.5 H 2 3 L L 2 1 P H 2 5 RIGHT H 1 6 L L 2 1 P BACK CONTROL LEFT H 1 4 FRONT CONTROL AWG #12 15.14 LTR DATE DESCRIPTION OF CHANGE WIRING DIAGRAM SK1986-1 PART NO. 2 1 1 PILOT LIGHT PILOT LIGHT 2 Y X NOTE: FOR SUPPLY CONNECTIONS USE COPPER WIRE ONLY, SUITABLE FOR AT LEAST 90 DEG. C (194 DEG.
