CHILDREN’S ELECTRONIC MOTORCYCLE • Suitable for 3+ Years • Maximum user weight: 30 kg WARNING: Must be assembled by an adult. OWNERS MANUAL with Assembly Instructions Read and understand this entire manual before using! Please keep this manual for future reference as it contains important information. Before first time use, charge the battery for at least 4-6 hours, but no more than 10 hours.
About Your New Vehicle 1 On the purchase of your new Ride-On. This ride-on car will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference. Follow the recommendations in this manual, they are designed to improve the safety and operation of your ride-on car and its rider.
2 Parts List NO.
3 Parts Diagram 6 13 10 5 4 10 11 5 15 6 15 6 6 12 1 3 8 6 12 6 14 7 6 9 8 2 8
4 Safety PREVENT INJURIES AND DEATHS: • NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle. • This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. • Protective equipment should be worn. • Never use in roadways, near cars, or on near steep inclines or steps, swimming pools or other bodies of water. • Always wear shoes, always sit on the seat.
5 Attach the Rear Shock Absorber 1 2 3 Rear bottom View 1. Rotate the rear wheel frame until the bolt of the rear shock absorber is inserted into the hole on the rear wheel frame. 2. Turn the vehicle body on its side. Slide a Ø8 washer onto the front axle. 3. Tighten a lock nut to the end of the bolt with a spanner.
6 Attach the Side Wheels & Front Fender 1. Fit the side wheel to the vehicle body. 2. Slide a Ø10 washer onto the rear axle. 3. Tighten a lock nut to the end of the rear axle with a spanner. Repeat for the other side. 4. Fit the front fender to the front fork. 2 5. Insert and tighten two Ø4x12 screws with a screwdriver.
7 Attach the Front Wheel 2 1 4 5 3 Remove the lock nuts and front axle from the front fork. 1-2. Slide a Ø8 washer to one end of the front axle. Tighten a lock nut to the end of the front axle with a spanner. 3. Insert the front axle through the hole on one side of the front fork, then through the hole in the center of the front wheel, and continue to push the front axle through the hole on the other side of the fork. 4. Slide a Ø8 washer to the front axle. 5.
8 Attach the Handle bar - 1 1 2 3 Front bottom View 5 1. Fit the front fork assembly to the vehicle body. 2. Align the holes on each side of front fork with the holes on the vehicle body. Insert the M8x150 bolt into the hole op top of the front fork, through the holes on vehicle body, and out through the hole on the bottom of the front fender 3. Left up the front fork and tighten a locknut to the end of the M8x150 bolt with a spanner from the bottom side. 4. Fit the handle to the the front fork. 5.
9 Attach the Handle bar - 2 2 1 3 5 4 6 1-2. Fit the handle bar cover to the front fork. Insert two Ø4x12 screws and tighten with a screwdriver. And repeat for other handel bar cover. 3. Pass the wire connector on the right handle bar through the cable tie on the front fork. 4. Plug the wire connector on the handlebar into the connector on the vechiel body. 5-6. Tighten the cable tie, then cut off the excess part of the cable tie with scissors.
10 Connect the Power Supply 2 1 Top View 3 1. Turn the lock on the top of the seat to unlock position with a coin or a slotted screwdriver. 2. Remove the seat. 3. Plug the red connector on the vehicle body into the red connector on the battery. 4. Replce the seat.
11 Use Your New Vehicle 2 1 3 5 4 1. Power button: Turn the product on and off. 2. Forward button: ● To move the product forward, press the button down. ● To brake or slow down, release pressure from the button. 3. High speed button: Operate the product to move forward in high speed. 4. Low speed button: Operate the product to move forward in low speed. 5. Power Indicator Check the power level of your battery: ●● ● All three lights means the battery is 100% (fully) charged.
12 Charging WARNING! ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY! WARNING! This product with Charging Protection: when charging, all functions will be cut off! Only an adult can charge and recharge the battery! • The POWER SWITCH must be turned in OFF position when charging. • Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger. • When the vehicle begins to run slowly, recharge the battery.
13 Troubleshooting Guide Problem Vehicle does not run Vehicle does not run very long Possible Cause Recharge battery. Thermal fuse has tripped Reset fuse, see Battery connector or wires are loose Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor . contact your distributor please. Battery is dead Replace battery, contact your distributor please. Electrical system is damaged Contact your distributor please.
Maintaining 14 • It is parents' responsibility to check main parts of the toy before using, must regularly examine for potential hazard, such as the battery, charge,cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed. • Make sure the plastic parts of the vehicle are not cracked or broken. • Occasionally use a lightweight oil to lubricate moving parts such as wheels.
Fuse 15 The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 20 seconds and then turned ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need repair. Contact your distributor please. To avoid losing power, follow these guidelines: ● Do not overload the vehicle.
