Instructions / Assembly

Attach the Front Wheel

Remove the lock nuts and front axle from the front fork.

1-2. Slide a Ø8 washer to one end of the front axle. Tighten a lock nut to the end of the

front axle with a spanner.

3. Insert the front axle through the hole on one side of the front fork, then through the

hole in the center of the front wheel, and continue to push the front axle through the

hole on the other side of the fork.

4. Slide a Ø8 washer to the front axle.

5. Use a spanner to tighten the lock nut into the front axle. Tip: Use two spanners to

tighten the lock nuts on both sides of the front axle at the same time, but do not

overtighten them, to ensure that the front wheel can rotate freely.