Instructions / Assembly

1
3
4
2
5
Attach the Handle bar - 1
8
1. Fit the front fork assembly to the vehicle
body.
2. Align the holes on each side of front fork
with the holes on the vehicle body. Insert
the M8x150 bolt into the hole op top of
the front fork, through the holes on
vehicle body, and out through the hole on
the bottom of the front fender
3. Left up the front fork and tighten a
locknut to the end of the M8x150 bolt with a spanner from the bottom side.
4. Fit the handle to the the front fork.
5. Tighten two lock nuts with a spanner to secure the handle bar to the front fork.
Front bottom View