Instructions / Assembly
5
Recharge stand
7
Functional instructions
1 First open the key to the total power supply,
the lights lit up and accompanied by the start
of the sound.2 Move the steering wheel button,
this time the music rings. Sound size adjustment
will be up and down the first switch key press,
can be achieved.3 The upper left corner of the
music board is MP3 interface, the following is the
memory card insertion port and next to the USB
jack.4 Point move "story /V+" key, this time for the
story mode.5 "Music /V-" button, at this time for the
song mode.6 Point move "ancient poetry / play" key,
this time for the ancient poetry mode.7 "Early" button,
at this time for early education mode.8 Point "horn"
key, this time for the speaker mode.9 "Forward and
backward" switch forward gear, step on the pedal
switch car forward. Will "go back" after the switch
back, step on the foot switch the car to run backwards.
11 The red circular switch is the swing start button,
and the switch can realize the swing function.
8
“
Warning:Protective equipment should be worn.Not
to be used in traffic.”
“non-rechargeable batteries are not to be recharged”
Products should be properly assembled by the adults
and then use.
Please do not use in the streets,roads,landslides and
other dangerous places,must be used under adult
guardianship.
12V4.5AH
12V20W 12V20W
3
8
Installation mirror
First, differentiate the left and right
Mirror, and then rewind.
Insert the left and right of the door.
( as shown in figure 4)
Install windscreen
First remove the windscreen, then align
the windscreen frame to the vehicle body,
and press firmly to hear the kachasheng
installation in place.
( as shown in figure 7 )
1.Non rechargeable battery can not be charged.
2.Power supply terminals shall not be short
connectted.
3.Rechargeable batteries can only be charged
under adult guardianship.
4.Diffenet types of batteries or old and new
batteries do not be mixed.
5.The battery should be put in the correct
electrode.
6.The exhausted battery should be removde from
the toy.
7.The charging battery should be taken out
from the toy before charging.
8.Contains small parts,not suitable for chil-
dren under the age of 3 to use.
9.Products should be properly assembled by the
adults and then use.
10.Please do not use on the streets roads and
other dangerous places must be used under
adult guardianship.
6
ASTM F963
Warning:This toy is unsuitable for children under 3 years
due to its maximum speed
Products should be assembled by adults right before
“warning:To be used under the direct supervision of
an adult.”
8)CAUTION Aduit Assembiy Required.
Mercedes-AMG GT
1.First please open the seat, make sure that its wires are
connecting to batteries by red in red, black in black.
2.Please open charging socket cover on its right side of car
body, and plugging into outlet.
3.The recharge period is <10hours
4.Please use its own adapter in recharging.
5. In re-charging process, it is normal for battery temperature
reaches to 60℃
6.When the car is in re-charging state, its whole electric
circulation has been stopped automatically,so the car does not
run anymore.
7. In replacement, please do not mixing previous and new
batteries together,neither different brands.
8.Please do recharging at least once a month.
1.Please do 10 hours of re-charging before its first running.
2.Please do not run the car on any road, street, slope, and
narrow space.
3.This product is not suitable for child under 3 years old.
4.Its maximum loading capacity is 66lbs, and it is for one child
only.
5.Please do not switching forward or backward when the car is
running.
6.Please disconnect its batteries when the car has been in
storage.
7.Please do not run the car into any water or rain.
8.Before running the car please make the child sit in and
fasten its seat belt.
9.The remote control should be operated by adults only, not
children.
10.Safe operation period of 3 years.
11.This product contains small accessaires which must be
installed by adults only.
12.Please run the car under adults supervision.
13.
Don't mix different or new and old batteries.
14.
The battery should be put in the correct electrode.
15. Non-rechargeable batteries are not to be recharged.
16.Please take out battery and then charge.
17.Different types of batteries or new and used batterie are not to be mixed.
18.Batteries are to be inserted with the correct polarity.
Please putting the body upside down.
Please pass the front axle through the
front body as it shows in the picture.
Then in order, please put on metallic
gasket, plastic bushing, one of front
wheels, metallic gasket again.
Screw one nut on front axle, put its cover
on.
Install rear wheels
please put metallic gasket on back axel
first.
please push suspension spring and its
plastic bushing back into the main body,
then let back axel go through the body,
suspension springs, and plastic bushings
at same time.
after that please put back axel going
through by following order:
one of its rear wheels, metallic gasket,
screw the nut on back axel.
put on its cover on screw.
Install front wheels
please connect wires from steering wheel
to wires from main body.
it does not matter about wires' positives
neither negatives.
please cover the steering wheel on the
metal pipe which is in the middle of the
dash board.
Thread the bolt through wholes both on
steering wheel and metal pipe together.
screw nut on the bolt.
2
3
Seat
Adapter
instruction
Installation and use manual
connect the positive first
figure
Cannot be washed with water.