Instructions / Assembly

5
Installation of the bumper
1
2
3
Figure 1: Install decorative lamps on
bumper with 4pcs M4*12mm screws.
Figure 2: Install decoration on the bumper
with 4pcs M4*12mm screws.
Figure 3: Install the bumper on the car
body with 6pcs M4*12mm screws.
2.Installation front axle and front wheel
1
3
Figure1: Install the front axle on the car
body and fix it with 2pcs M8 gaskets and M8
nuts.
Figure 2: Place a M10 gasket at the end of
the steering rod and fix it with a M8 nut.
Figure 3:Load a M12 gasket on the rear axle
and add a front wheel.
Load another M10 gasket
Tighten 8 nuts with a plastic wrench and add
a plastic core cover
Both sides of the
front wheel
installation method
is the same
2
X2
X1