CHILDREN’S ELECTRONIC TOY TRACTOR • Suitable for 3+ Years • Maximum user weight: 30 kg The trailer of this product is only for decoration, passenger and loading are not allowed! OWNERS MANUAL with Assembly Instructions Read and understand this entire manual before using! Please keep this manual for future reference as it contains important information. Before first time use, charge the battery for at least 4-6 hours, but no more than 10 hours.
A About Your New Vehicle On the purchase of your new Ride-On. This ride-on car will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference. Follow the recommendations in this manual, they are designed to improve the safety and operation of your ride-on car and its rider. Specification Battery 12V4.
B Parts List NO. PART NAME Q’TY (PCS) WITHOUT TRAILER WITH TRAILER REMARK 1 Vehicle body 1 1 2 Normal wheel 2 4 3 Driving wheel 2 2 4 Φ10 washer 2 4 5 Lock nut 4 6 6 Normal wheel hubcap 2 4 7 Driving wheel hubcap 2 2 8 Steering wheel 1 1 9 Φ5 nut 1 1 10 M5X30 machine screw 1 1 11 Seat 1 1 12 Φ4x12 round head screw 5 5 13 Trailer linkage \ 1 If equipped, for the trailer 14 Φ4x12 flat head screw \ 12 If equipped, for the trailer 15 Bushing \ 2 If eq
23 25 24 6 5 26 7 Assembly tools required: Screwdriver (not included) 4 18 15 2 5 20 19 14 26 3 21 6 20 13 14 17 22 5 16 26 12 10 2 11 4 8 9 1 3 Parts Diagram C
Safety D PREVENT INJURIES AND DEATHS: • NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep child in view when child is in vehicle. • This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. • Protective equipment should be worn. • Never use in roadways, near cars, or on near steep inclines or steps, swimming pools or other bodies of water. • Always wear shoes, always sit on the seat.
E Attach the Trailer linkage & Driving wheel 2 Turn the vehicle body downside up. 1. Fit the trailer linkage to the vehicle 1 body. 2. Insert four Ø4x12 flat head screws through the trailer linkage and into the vehicle body and tighten with a screwdriver. Rear Bottom View 3 4 6 5 Rear Bottom View 3. Slide a driving wheel onto the rear axle. Ensure the driving wheel match up with gear box on the vehicle body. 4. Slide a Ø10 washer onto the rear axle. 5.
E Attach the Rear Wheels & Steering Wheel 2 1 Front Bottom View 3 5 4 1. Slide a Ø10 washer onto the front axle. 2. Slide a normal wheel onto the front axle. 3. Slide a Ø8 washer onto the front axle. 4. Tighten a lock nut to the end of the front axle. 5. Insert the hubcap to the driving wheel. Repeat for the other front wheel. 6. Fit the steering wheel to the end of the steering column. 7. Line up the holes on the steering wheel with the holes on the steering column, insert the M5x30 machine screw.
E Attach the Exhaust Pipe & Connect the Power 1. Fit the exhaust into the hole on the right 1 side of the vehicle body, push until you hear it click into place. 2. Plug the red connector on the vehicle body into the red connector from the battery.
Attach the Seat & the Trailer 2 1 E 1. Fit the seat to the vehicle body. 2. insert five Ø4x12 round head screws and tighten. Rear View Attach the Trailer (if equiped) 4 3 Turn the trailer house downside up. 3. Fit the trailer support to the trailer house. 4. insert eight Ø4x12 flat head screws and tighten.
E Attach the Rails & Trailer Wheel (if equiped) Turn over the trailer house 1 1. Fit the side rails to the front rail 2. Fit the rails assembly to the trailer 1 hours. 2 2 2 5 3 6 7 4 3. Tighten a locknut to the end of trailer axle. 4. Slide a Ø8 washer onto the trailer axle. 5. Slide a normal wheel (out side first) on the trailer axle. 6. Slide a Ø10 washer onto the trailer axle. 7. Slide bushing on the trailer axle. 8.
Attach the Trailer to Vehicle body (if equiped) 1 E 3 2 4 5 6 1. Slide bushing on the trailer axle. 2. Slide a Ø10 washer onto the trailer axle. 3. Slide a normal wheel (out side first) on the trailer axle. 4. Slide a Ø8 washer onto the trailer axle. 5. Tighten a locknut to the end of trailer axle with a spanner. Hint: An extra spanner has been provided to hole the lock nut on the other side of the trailer axle while tightening the lock nut on the other side. 6.
F Use your new ride-on IMPORTANT! Always stop vehicle when changing the speed or direction to avoid damage the gears and motor. 5 1 2 3 4 1. One button start: Turns the vehicle on and off. 2. High / Low speed forward & Reverse shift: Changes the direction that vehicle moves from forward to reverse.
F Use the Player A F B C D E A. USB slot (Maximum support 15GB) B. Change the audio input (from the Bluetooth or the USB) C. Play / Next D. Decrease volume E. Increase volume F. Battery display: It displays the power level of the battery when the vehicle stops. When one indicator remains, recharge the battery please.
F Use the Remote Controller (IF EQUIPPED) Brake button Forward button Right button Reverse button Speed select button Speed indicator Left button Attach the batteries of controller Lift the battery compartment door on the back of the controller and insert two AAA(LR03) batteries. HINT: Batteries not included. Refer to the Battery Information on the page 1. 1. Build connection Long press the forward and reverse buttons for 3 seconds, and the speed indicator flashes.
Charging G WARNING! ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY! WARNING! This product with Charging Protection: when charging, all functions will be cut off! Only an adult can charge and recharge the battery! • The POWER SWITCH must be turned in OFF position when charging. • Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger. • When the vehicle begins to run slowly, recharge the battery. 1 2 1.
H Troubleshooting Guide Problem Vehicle does not run Vehicle does not run very long Possible Cause Recharge battery. Thermal fuse has tripped Reset fuse, see Battery connector or wires are loose Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor . contact your distributor please. Battery is dead Replace battery, contact your distributor please. Electrical system is damaged Contact your distributor please.
Maintaining I • It is parents' responsibility to check main parts of the toy before using, must regularly examine for potential hazard, such as the battery, charge,cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed. • Make sure the plastic parts of the vehicle are not cracked or broken. • Occasionally use a lightweight oil to lubricate moving parts such as wheels.
J Fuse The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 20 seconds and then turned ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need repair. Contact your distributor please. To avoid losing power, follow these guidelines: ● Do not overload the vehicle.
