(Weight Limit 30KGS) This toy is unsuitable for children under 3 years.
WARNING！ •To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles，on or near steep inclines or steps，swimming pools or other bodies of water. Always wear shoes and a helmet. •Never allow more than 1 riders. •TO PREVENT FIRE AND ELECTRIC SHOCK: •Only use battery and charger provided and specified by manufacturer. Use of the wrong type of battery for charger could cause a fire or explosion. •DO NOT use the battery or charger for any other product.
Specification instruction Name Battery Fuse Motor Suit age Maxweight Charge time Charger Speed Specification 12V7AH*1 15A 12V*2 3-7 years old 30KG Charge 8-12 hours 12V1000MA 3-6KM/h ※Above parameters are customer optional, the actual parameter subject to physical entity.
Parts List No. Name of accessory Qty No.
Installation instruction 1. Install front bumper Outwards push the front air cover fastener which already installed on car body well, then make the groove of front bumper align to this and insert in, the front bumper align to the screw hole of car body, use six pieces 4*12 flat head screw fixed.
The left/right front headlight wire pass through the holes at both side under the vehicle, align to the inner insert plate at vehicle head, inserted then OK. 2. Install front wheel and rear wheel Install front wheel: 1) Make the front wheel shaft align to car body screw hole, fixed by 8 pieces 4*12 screws.
Install rear wheel:
1） First make the rear wheel drive plum blossom align to the screw hole of wheel, use 3 piece 4*12 round head screw fixed (total installed two wheels according to these steps) 2）Place shocking proof spring and shock proof plastic parts in the groove of car body，then the rear wheel shaft align to car body and pass through the hole at both side.
4）Then each place one M10 pad at both side, use one M10 anti loose nut fixed .Press the wheel cover on the wheel.Press the wheel cover on the wheel then OK.
3. Install car door and steering wheel Install car door steering wheel :Loose the fix screw at both side of instrument panel, make the car door align to the car body and placed well, then make the steel sheet on the car door insert into the instrument panel, tighten the fix screw of instrument panel then OK.
Install steering wheel:Push into steering wheel after SM terminal on steering wheel align and insert well with SM terminal of body, then align the steering wheel at correct position then insert into car and hooked well then OK, don’t force beat the key of steering wheel during assemble process. (pay attention the wire can’t be seizing during installation) 4.
5. Install seat Make the hook at back of the seat align the position well shown as the picture, use two pieces 4*12 flat head screw fixed after place in the position (Screw hole of seat align to car body screw hole) then OK. 6. Install side tail frame and rear tail frame Install side tail frame:shown as the picture, the side tail frame align position well, force downward press down it according to the arrow direction, clamp to the right position then OK.
Instruction 1. Use of storage battery Open the hood, take off the protecting bush (white plastic)of storage battery joint, plug in the storage wire (red line match red line, black line match black line), then storage battery power on. Please charge the storage battery in time when the quantity of electricity of storage battery not enough. The charge socket locate at the down left position of car’s instrument panel. (Attention that toys can’t be operated under the charging status.
2.
3. Install and use storage battery of remote controller Install battery:open the battery cover which on the remote control, install two pieces AAA (1.5V)(#7)dry battery, pay attention at polarity of battery when installing. Cover the battery cover and use screws fixed (please follow above steps when renewal the battery, need adult renewal it. Please don’t mix use the new and old batteries or different batteries. Should take away the exhausted batteries from the toys in time.) use method: a.
speed). Back a car is only low speed Press“P”key hold the brake, All LED flicker. WARNING! 1.Not for children under 3 years. Small parts. Choking hazard. 2.The remote controller only can be used with adult’s guidance. 3.Load two AAA(1.5V )batteries according to the diagram. 4.Non-rechargeable batteries are not to be recharged. 5.Different types of batteries or new and used batteries are not to be mixed. 6.Batteries are to be inserted with the correct polarity. 7.
Warning To make your baby safety driving, you must pay attention at the below warning: 1.Assemble and adjust of products must be done by adult, please make children far away the motion parts. 2. Small part in it, not suitable to used by the children under 3 years old! 3. Must correctly use the life belt when children sitting. Never close to fire! 4. The children use this product must be guided by adult, and the guardian can’t leave during the use process! 5.
Notices at charging 1. When fist time use the electric car,must guarantee the positive and negative pole of power supply already correctly connected(the storage battery installed in the engine plate at front of car, attention to differentiate positive/negative pole when connecting, need red to red, black to black). Must guarantee storage battery charged 8 hours, otherwise, it will perpetual damage the storage battery and can’t recovery. 2.
Use notices 1.Please check whether all parts installed on position, tightly connected before use. 2.Can’t use in the dangerous area like street, road, slope and ditch, etc. 3.Please don’t used on smooth ground, example marble, ground tile, etc. 4.Don’t shift forward/backward switch during the electric car running. Pay attention don’t allow children stand on the seat. 5.Don’t change the circuit and additional device with electric of this car. 6.
Maintenance 1.To guarantee your baby not be hurt unexpected, please frequently check and maintain this car. 2.Check whether package assemblies are complete before assemble it, contact us immediately if short. 3.Fix time check whether has screws loose, part damaged. 4.Please frequently check whether it intact when install or use every part. 5.When do disassembling, please operating according to the operating specification carefully, to avoid caused unnecessary damage. 6.
