Instructions / Assembly

5. Install seat
Make the hook at back of the seat align the position well shown as
the picture, use two pieces 4*12 flat head screw fixed after place in
the position (Screw hole of seat align to car body screw hole) then
OK.
6. Install side tail frame and rear tail frame
Install side tail frame:shown as the picture, the side tail frame
align position well, force downward press down it according to the
arrow direction, clamp to the right position then OK. (Please confirm
the front/back direction in advance before installation then install)
Install rear tail frame:shown as the picture, the rear tail frame
align the position well and after both sides parallel insert into the
side tail frame, used two pieces 3*12 round head screws fixed well
then OK. (Attention that must parallel insert into the right position
first then fixed the screws)