Instructions / Assembly

3. Install and use storage battery of remote
controller
Install battery:open the battery cover which on the remote control,
install two pieces AAA (1.5V)(#7)dry battery, pay attention at polarity
of battery when installing. Cover the battery cover and use screws
fixed (please follow above steps when renewal the battery, need
adult renewal it. Please don’t mix use the new and old batteries or
different batteries. Should take away the exhausted batteries from
the toys in time.)
 use method:
a. First time use need to match code, this product has memory
function.Replace battery is unnecessary match code.
b. Hold down“▲”&“▼”keys for 3 seconds start match code, The
first LED flicke.
c. Turn on the car body power now, The first LED lit up, Match
code Success
d. Remoter 10 seconds not run will be standby, Press any key
wake up.
e. Keys caption:“▲” Forward,“▼”Back,“◀” Left,“▶”
Right,“S”Speed,“P” Brake.Press“S”key set up speed(1 led lit up
is low speed, 2 leds lit up is medium speed,3 leds lit up is high