Instructions / Assembly

The left/right front headlight wire pass through the holes at both
side under the vehicle, align to the inner insert plate at vehicle head,
inserted then OK.
2. Install front wheel and rear wheel
Install front wheel:
1) Make the front wheel shaft align to car body screw hole, fixed by
8 pieces 4*12 screws.
2）Each place one M10 pad on the front wheel shaft at both side,
each put one shaft bush (Black plastic) in two wheels respectively,
then install these two wheels on the front wheel shaft respectively,
then each place one M10 pad on out side of rear wheels, use one
anti loose nut fixed finally .Press the wheel cover on the wheel.Press
the wheel cover on the wheel then OK.