BMW i8 COUPE BATTERY OPERATED RIDE-ON Owner’s Manual with Assembly Instructions Styles and colo(u)rs may vary. Made in China. The owner’s manual contains important safety information as well as assembly, use and maintenance instructions. The Ride-on Car must be assembled by an adult who has read and understands the instructions in this manual. Keep the package away from children and dispose of properly before use. Keep this manual for future reference.
About Your New Ride-On │ 1 On the purchase of your new BMW Ride-On. This ride-on will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference. Follow the recommendations in this manual, they are designed to improve the safety and operation of your ride-on car and it’s rider. BMW i8 Coupe Children Electric Ride-On manufactured by Zhejiang Jiajia Ride-On Co., Ltd.
User Notice │ 2 WARNING! • CHOKING HAZARD - Small parts. Not suitable for children under 36 months. The product contains small parts, keep children away when assembling. • ADULT ASSEMBLY REQUIRED. • Always remove protective material and poly bags and dispose before assembly. • Protective equipment should be worn. Always wear shoes and sit in the seat when operating the vehicle. • Only drive on level ground. Never use on the lawn. • Never leave a child unattended.
Parts Diagram │ 3 HINT: Some parts shown are assembled on both sides of vehicle 12 13 18 14 19 17 16 10 20 9 11 15 7 2 6 5 3 1 8 6 5 8 4
Parts List │ 4 PART NO.
1WD Attach the Rear Wheels │ 5 HINT: If your vehicle is Two Wheels Driving Type, see the next page please. Rear Bottom View 2 5 4 3 1 Remove all the parts from the rear axle. 1. Slide the rear gear box onto the rear axle from Left Side (“R” labeled gear box should be fit to the “R” side, “L” labeled gear box should be fit to the “L” side), keep the connector and the motor on the gear box pass through the larger hole and out where the battery sits. 2. Slide the rear wheel onto the rear axle.
2WD Attach the Rear Wheels │ 6 Rear Bottom View 2 5 4 3 1 Remove all the parts from the rear axle. 1. Slide the rear gear box onto the rear axle. “R” labeled gear box should be fit to the “R” side of vehicle body; “L” labeled gear box should be fit to “L” side of vehicle body. Keep the motor and the connector on the gear box pass through the larger hole on the rear of the vehicle and out where the battery sits. 2. Slide the rear wheel onto the rear axle.
Attach the Front Wheels │ 7 2 5 4 Front Bottom View 3 1 Remove all the parts from the front axle. 1. Slide a Ø10 washer onto the front axle. 2. Slide a front wheel onto the front alxe. 3. Slide a Ø10 washer onto the front axle. 4. Tighten a lock nut to the end of the front axle with a spanner. 5. “Snap” the hubcap to the wheel. Repeat the above procedure to assemble the other normal wheel.
Attach Windshield & View Mirrors│ 8 Turn the vehicle body upright. 1 1. Insert the tabs on the windshield into the holes on the vehicle body, push until you hear it “click” into place. 2. Insert the view mirror into the door, press until you hear it “click” into place. Repeat for the other view mirror.
Attach the Steering Wheel │ 9 HINT: If the steering wheel of your vehicle equipped with the sound function, please follow the steps 1-4 to add the batteries (Not Included), and refer to the battery information on page 2. 3 1. With a screwdriver remove the screw on the battery cover located in the center of the steering wheel. 2. Remove the battery cover from the top of the battery compartment. 3. Insert 2x1.5 AA batteries in their correct polarities. 1 2 4 4.
Connect the Power Supply │ 10 Rear Top View Red battery connector White vehicle connector 1 e Fus box y Red vehicle connector ba r tte 2 White motor connector 1WD 1. Plug the red fuse connector into the terminal on battery. 2. Plug the vehicle connector into the motor connector on body as shown above. 2WD 1. Plug the red fuse connector into the terminal on battery. 2. Plug the vehicle connector into the motor connector on body as shown above. Repeat for the other side.
Attach the Motor Hood(s) & Seat │ 11 1. Fit the motor hood over the motor. 2. Insert four Ø4x12 screws and tighten. x4 2 2WD Repeat for the other motor hood. 1 4 3 Tabs on back of seat 3. Fit the tabs on back of the seat into the grooves on the rear of the vehicle. 4. Insert two M5x16 machine screws through the seat and into the vehicle body, and tighten them with a screwdriver.
Use Your Ride-on │ 12 1 5 4 6 3 2 1. Power button: Turns the vehicle on and off. 2. Foot pedal: Applies power (speed) to the vehicle. ● To move the car, press the pedal down. ● To brake or slow down, release pressure from the pedal. 3. Forward/reverse switch: Changes the direction that vehicle moves from forward to reverse. ● To move the vehicle forward, shift the lever to top position. ● To move the vehicle backward, shift the lever to down position. 4.
Charging │ 13 WARNING! • ONLY an adult is allowed charge and recharge the battery! • This product with Charging Protection: when charging, all functions will be cut off. • The POWER SWITCH must be turned in OFF position when charging. • Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger. • When the vehicle begins to run slowly, recharge the battery.
Troubleshooting Guide │ 14 Problem Vehicle does not run Vehicle does not run very long Possible Cause Battery low on power Recharge battery. Thermal fuse has tripped Reset fuse, see Battery connector or wires are loose Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor . contact your distributor please. Battery is dead Replace battery, contact your distributor please. Electrical system is damaged Contact your distributor please.
Maintaining │ 15 • It is parents' responsibility to check main parts of the toy before using, Must regularly examine for potential hazard, such as the battery, charge, cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed. • Park the vehicle indoors or cover it with a tarp to protect it from wet weather. • Recharge the battery after each use. Only an adult can handle the battery.
