Instructions / Assembly

HINT: The front and rear fenders on the left side have been assembled by
factory.
1
2
3
4
Turn the vehicle body upright.
1. “Snap” the front fender to the vehicle body.
2. “Snap” the rear fender to the vehicle body.
Turn the vhielc body upside down.
3. Insert three Ø4x12 screws through the vehicle body and into the front fender, tighten
with a screwdriver.
4. Insert four Ø4x12 screws through the vehicle body and into the rear fender, tighten
with a screwdriver.
Attach the Front & Rear Fenders on the Right Side
6
Front botttom View Rear botttom View