User's Manual
Table Of Contents
- 1 Safety and Compliance
- 1.1 Safety and Usage
- 1.1.1 Usage Warning
- 1.1.2 Emergency Warning
- 1.1.3 Child Safety
- 1.1.4 Infrared Warning
- 1.1.5 Epilepsy Warning
- 1.1.6 Mechanical Shock Warning
- 1.1.7 Bending Warning
- 1.1.8 Do not open the devices
- 1.1.9 Connectors
- 1.1.10 HDMI Cable Warning
- 1.1.11 Environment
- 1.1.12 Battery Warning
- 1.1.13 Wireless Warning
- 1.1.14 Transportation
- 1.1.15 Accessories
- 1.1.16 Cleaning
- 1.1.17 Disposal
- 1.2 Compliance Information
- 1.3 Other limitations and considerations
- 1.3.1 Intended use
- 1.3.2 SD memory cards
- 1.3.3 Multiple connections between Glasses Controller Software and Recording Unit
- 1.3.4 Eye movement classification
- 1.3.5 Light conditions
- 1.3.6 Eyelashes
- 1.3.7 Droopy eyelids
- 1.3.8 Eye glasses and contact lenses
- 1.3.9 WLAN connectivity
- 1.3.10 Power
- 1.3.11 Keeping Tobii Glasses Controller Software and the Recording Unit firmware up to date
- 1.1 Safety and Usage
- 2 Introduction
- 3 Installing and Updating Tobii Glasses Controller Software
- 4 Updating the Tobii Glasses Recording Unit firmware
- 5 Getting to know Tobii Glasses 2
- 6 Workflow Quick Guide
- 7 Basic Operations with Tobii Glasses 2
- 7.1 Setting up Tobii Glasses 2 hardware
- 7.1.1 Charging Recording Unit batteries
- 7.1.2 Inserting/removing the battery – Glasses Recording Unit
- 7.1.3 Inserting/removing an SD memory card in the Recording Unit
- 7.1.4 Connecting the HDMI cable
- 7.1.5 Changing nose pads (remove and mount new):
- 7.1.6 Changing the lenses on the Head Unit
- 7.1.7 Turning Tobii Glasses 2 on and off
- 7.2 Managing study data in Tobii Glasses Controller Software
- 7.3 Connecting the Tablet running Tobii Glasses Controller Software to a Recording Unit
- 7.4 Fitting the Tobii Glasses 2 Eye Tracker onto a participant for recording
- 7.5 Recording with Tobii Glasses 2
- 7.6 Watching a recording live with the Live Viewer
- 7.7 Locating recordings
- 7.8 Replaying a recording
- 7.9 Exporting a gaze replay video
- 7.10 Deleting a recording
- 7.11 Backing up recorded data
- 7.12 Other operations and information
- 7.13 Tobii Glasses Controller Software considerations and limitations
- 7.1 Setting up Tobii Glasses 2 hardware
- 8 Advanced Usage with Multiple Units
- 9 Accessories
- Appendix A Technical Specifications
- Appendix B Calibration target
4 Updating the Tobii Glasses Recording
Unit firmware
From time to time Tobii will release new updates of the Tobii Glasses Recording Unit firmware that will improve performance
and/or introduce new functionality. Updating the Recording Unit firmware is done through Tobii Glasses Controller Software. If
the computer is online Tobii Controller Software will indicate with an alert on the dashboard if there is a new firmware available.
The Recording Unit may also be updated using an SD memory card with the new firmware. If this alternative is necessary, con-
tact Tobii Support or visit http://www.tobii.com/analysissupport for further instructions and to download the latest firmware.
To update the Recording Unit firmware:
1. Make sure Tobii Glasses Controller Software is connected to the Recording Unit with an Ethernet cable and that the Re-
cording Unit is powered.
2. Tap the Settings icon on the Dashboard of the Glasses Control Panel for the relevant Recording Unit.
3. To initiate firmware upgrade, Tap Upgrade Firmware, and follow the instructions on the screen.
Tobii Glasses 2 Eye TrackerUser’s manual v.1.0.2 - en-US
4 Updating the Tobii Glasses Recording Unit firmware
9