User's Manual

Table Of Contents
1. Power button & power indicator LED -
Touch button that turns the Recording Unit on
and off. LED indicates power state and remain-
ing battery power.
2. 3.5 mm connector for data synchroniza-
tion Currently not in use.
3. LAN port Connects to a Windows tablet or
computer running Tobii Controller Software, via
the supplied Ethernet cable. The Recording Unit
can also be connected to the tablet or computer
via WLAN
5
.
4. Connection status LED Indicates connec-
tion to Head Unit and Tobii Glasses Controller
Software.
5. SD card Activity LED Indicates if SD memory
card is present and if Recording Unit is busy
writing on the SD memory card.
6. HDMI connector Connects to Tobii Glasses
2 Head Unit via the supplied HDMI cable.
7. Micro USB connector Connects to USB
charger for powering the unit and charging the
battery.
8. SD memory card slot Slot for SD memory
card for storage of recorded data.
9. Battery compartment Holds the battery for
the Recording Unit and Head Unit
10. Belt clip For attaching the Recording Unit to
participants belt.
5.2 Tobii Glasses Controller Software user interface overview
This section aims to give a broad overview of the user interface of Tobii Glasses Controller Software. For hands on instructions,
see section 7 Basic Operations with Tobii Glasses 2, page 18.
The Tobii Glasses Controller Software user interface has been optimized to enable easy and efficient data collection with Tobii
Glasses 2. The software also supports basic replay functionality for qualitative observational analysis and for validation of re-
corded data. Any further analysis should be performed using Tobii Glasses Analysis Software.
5.2.1 About the software
This is where you access information about Tobii Glasses Controller Software such as the version number.
14
5 Getting to know Tobii Glasses 2
Tobii Glasses 2 Eye Tracker Users manual v.1.0.2 - en-US
5. Not available in the Tobii Glasses 2 Live View Package.